Belden 1618A 010, Coax CATV Cable 14 AWG LDPE Black
SKU:Belden 1618A 010
$374.00
● Auf Lager
Beschreibung
Belden 1618A 010 is a Series 11 RG 11 coax CATV cable with 75 Ohm nominal characteristic impedance for indoor, outdoor, and direct-burial installations. It features a 14 AWG solid 0.064 in BCCS - Bare Copper Covered Steel conductor with PE - Polyethylene (Foam) insulation (Gas Injected). Shielding is Duobond® IV Quad Shield (Foil + 60% Braid + Foil + 40% Braid) with Duofoil® tape layers and CoreGuard® protection. The black PE - Polyethylene jacket is rated for Outdoor - Water Exposure and supports an operating temperature range of -55°C To +80°C.
Belden 1618A 010 Key Features
- Series 11 RG 11 coax CATV cable design with 1 coax for 75 Ohm signal transmission.
- 14 AWG solid conductor (0.064 in) in BCCS - Bare Copper Covered Steel / Copper clad steel construction.
- Duobond® IV Quad Shield (F/B+F/B) with Duofoil® tape layers (100%) and aluminum braid layers (60% and 40%), plus CoreGuard®.
- Black PE - Polyethylene jacket with environmental space rated for Outdoor - Water Exposure.
- Suitability: Indoor (Yes), Outdoor (Yes), Burial (Yes); Plenum (Y/N): No.
- Operating Temperature Range: -55°C To +80°C.
Belden 1618A 010 Technical Specs
Construction & Materials
| Coax construction | Coaxial |
|---|---|
| Number of coax | 1 |
| Number of conductors | 1 |
| Insulation material | PE - Polyethylene (Foam) |
| Dielectric material | FPE-Foamed (Cellular) Polyethylene |
Physical Dimensions
| Insulation nominal diameter | 0.28 in |
|---|---|
| Outer jacket nominal diameter | 0.407 in |
Electrical Characteristics
| Nominal capacitance (Conductor to Shield) | 16.2 pF/ft |
|---|---|
| Nominal inductance | 0.097 μH/ft |
| Nominal delay | 1.2 ns/ft |
| Nominal velocity of propagation (VP) [%] | 83% |
| Non-UL voltage rating | 300 V RMS |
| Nominal conductor DCR | 11 Ohm/1000ft |
| Nominal outer shield DCR | 3 Ohm/1000ft |
| Outer conductor DCR | 3 Ohm/1000ft |
RF Performance
| Return loss frequency range | 5 - 1000 MHz |
|---|---|
| Min. structural return loss (SRL) | 20 dB |
| Insertion loss (Attenuation) at 5 MHz | 0.38 dB/100ft |
| Insertion loss (Attenuation) at 55 MHz | 0.96 dB/100ft |
| Insertion loss (Attenuation) at 211 MHz | 1.9 dB/100ft |
| Insertion loss (Attenuation) at 270 MHz | 2.13 dB/100ft |
| Insertion loss (Attenuation) at 300 MHz | 2.25 dB/100ft |
| Insertion loss (Attenuation) at 350 MHz | 2.42 dB/100ft |
| Insertion loss (Attenuation) at 400 MHz | 2.6 dB/100ft |
| Insertion loss (Attenuation) at 450 MHz | 2.75 dB/100ft |
| Insertion loss (Attenuation) at 550 MHz | 3.04 dB/100ft |
| Insertion loss (Attenuation) at 750 MHz | 3.65 dB/100ft |
| Insertion loss (Attenuation) at 870 MHz | 4.06 dB/100ft |
| Insertion loss (Attenuation) at 1000 MHz | 4.35 dB/100ft |
Mechanical & Handling
| Bulk cable weight | 52 lbs/1000ft |
|---|---|
| Maximum recommended pulling tension | 308 lbs |
| Minimum minor axis bend radius | 4.25 in |
Compliance & Environmental Directives
| EU Directive 2000/53/EC (ELV) | Yes |
|---|---|
| EU Directive 2003/96/EC (BFR) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU Directive compliance | EU Directive 2003/11/EC (BFR) |
| EU CE Mark | No |
| MII Order #39 (China RoHS) | Yes |
Belden 1618A 010 Applications
- Designed for CATV signal runs where 75 Ohm coax performance is required.
- Use it for indoor installations that require a Series 11 RG 11 coax cable format.
- Choose it for outdoor installations in Outdoor - Water Exposure environments.
- Install it in direct-burial applications where Burial suitability is required.
Belden™ and all associated trademarks are the property of their respective owners.
Spezifikationen
| Attribute | Value |
|---|---|
| Coax construction | Coaxial |
| RG type | 11 |
| Series type | 11 |
| Number of coax | 1 |
| Number of Conductors | 1 |
| Shield layers | Layer 1: Tape, Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100%; Layer 2: Braid, Aluminum, 60%; Layer 3: Tape, Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100%; Layer 4: Braid, Aluminum, 40% |
| Non-UL voltage rating | 300 V RMS |
| Nominal capacitance (conductor-to-shield) | 16.2 pF/ft |
| Nominal inductance | 0.097 μH/ft |
| Nominal delay | 1.2 ns/ft |
| Nominal velocity of propagation (VP) [%] | 83% |
| Return loss | 5 - 1000 MHz, 20 dB (Min. Structural Return Loss (SRL)) |
| Nominal conductor DCR | 11 Ohm/1000ft |
| Nominal outer shield DCR | 3 Ohm/1000ft |
| Outer conductor DCR | 3 Ohm/1000ft |
| High Frequency Attenuation (Max. Insertion Loss) | 5 MHz: 0.38 dB/100ft; 55 MHz: 0.96 dB/100ft; 211 MHz: 1.9 dB/100ft; 270 MHz: 2.13 dB/100ft; 300 MHz: 2.25 dB/100ft; 350 MHz: 2.42 dB/100ft; 400 MHz: 2.6 dB/100ft; 450 MHz: 2.75 dB/100ft; 550 MHz: 3.04 dB/100ft; 750 MHz: 3.65 dB/100ft; 870 MHz: 4.06 dB/100ft; 1000 MHz: 4.35 dB/100ft |
| Bulk cable weight | 52 lbs/1000ft |
| Maximum recommended pulling tension | 308 lbs |
| Minimum minor axis bend radius | 4.25 in |
| Operating Temperature Range | -55°C To +80°C |
| Plenum (Y/N) | No |
| EU Directive 2000/53/EC (ELV) | Yes |
| EU Directive 2003/96/EC (BFR) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU directive compliance | EU Directive 2003/11/EC (BFR) |
| EU CE mark | No |
| MII Order #39 (China RoHS) | Yes |
| Priced Per | FT |
Abbildungen dienen nur als Referenz. Spezifikationen können sich ohne Vorankündigung ändern — prüfen Sie vor dem Kauf die Eignung für Ihre Anwendung. Die Herstellerdokumentation ist maßgeblich.
Brauchen Sie einen Zuschnitt, Mengenpreise oder ein Datenblatt?
Unser Team erstellt Angebote für individuelle Längen und Großbestellungen, meist am selben Tag.