Belden 8522 005 is a low temp plastic lead wire for inter-connection circuits and the internal wiring of computer and electronic equipments. It is a 1-conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation in a medium wall construction. Rated TYPE MW MIL-W-76C-PVC 1000V 80C, it includes a UL Voltage Rating of 1000 V RMS and a UL temperature of 80°C. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
Belden 8522 005 Key Features
- 1-conductor 18 AWG (16x30) TC - Tinned Copper construction for consistent internal wiring and inter-connection builds.
- PVC - Polyvinyl Chloride insulation with a medium wall construction.
- Rated TYPE MW MIL-W-76C-PVC 1000V 80C, with a UL Voltage Rating of 1000 V RMS.
- UL temperature of 80°C and operating temperature of -40°C to +80°C.
- Extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
- Shielded: Not Shielded.
- Compliance includes CA Prop 65, EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE), and China RoHS II (GB/T 26572-2011); RoHS compliant: Yes.
Belden 8522 005 Technical Specs
Physical Dimensions & Construction
| Insulation color | Green |
|---|
| Nom. thickness | 0.017 in (0.43 mm) |
|---|
| Nom. insulation diameter | 0.08 in (2.0 mm) |
|---|
| Overall cable diameter (nominal) | 0.08 in (2.0 mm) |
|---|
| Bulk cable weight | 7 lbs/1000ft |
|---|
Electrical Characteristics
| Nom. conductor DCR | 6.5 Ohm/1000ft |
|---|
| Max. current | Single Conductor in free air @ 30ºC: 16 A |
|---|
Mechanical Ratings
| Bend radius (stationary min.) | 0.8 in (20 mm) |
|---|
| Bend radius (installation min.) | 0.8 in (20 mm) |
|---|
| Max. pull tension | 19 lbs (8.6 kg) |
|---|
Standards, Type & Environmental Suitability
| Product type | MW-76 |
|---|
| Military compliance | MIL-W-76C Type MWP |
|---|
| Environmental suitability | Outdoor |
|---|
Belden 8522 005 Applications
- Use it for inter-connection circuits where a low temp plastic lead wire is specified.
- Choose it for the internal wiring of computer and electronic equipments.
- Specify it for (Type MW) MIL-W-76C-Low Temp applications.
Belden™ and all associated trademarks are the property of their respective owners.
