Belden 8522 006 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is a 1-conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation. This wire is rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL voltage rating of 1000 V RMS and an operating range of -40°C to +80°C. It is suitable for outdoor use and uses extruded PVC insulation that is flame and ozone resistant and inert to most chemicals, oils, and solvents.
Belden 8522 006 Key Features
- TYPE MW MIL-W-76C-PVC 1000V 80C rating with a UL voltage rating of 1000 V RMS.
- 1-conductor 18 AWG (16x30) TC - Tinned Copper construction for inter-connection circuits and internal wiring.
- PVC - Polyvinyl Chloride insulation with Blue insulation color.
- Operating temperature range of -40°C to +80°C with UL temperature of 80°C.
- Not shielded design.
- Environmental suitability: outdoor.
- Extruded PVC insulation is flame and ozone resistant and inert to most chemicals, oils, and solvents.
Belden 8522 006 Technical Specs
Construction & Materials
| Product type | MW-76 |
|---|
| Conductor count | 1 |
|---|
| Conductor size | 18 AWG |
|---|
| Stranding | 16x30 |
|---|
| Conductor material | TC - Tinned Copper |
|---|
| Insulation material | PVC - Polyvinyl Chloride |
|---|
| Insulation color | Blue |
|---|
Dimensions & Weight
| Nom. thickness | 0.017 in (0.43 mm) |
|---|
| Nom. insulation diameter | 0.08 in (2.0 mm) |
|---|
| Overall cable diameter (nominal) | 0.08 in (2.0 mm) |
|---|
| Bulk cable weight | 7 lbs/1000ft |
|---|
Performance & Electrical Characteristics
| Nom. conductor DCR | 6.5 Ohm/1000ft |
|---|
| Max. current | Single Conductor in free air @ 30ºC: 16 A |
|---|
Mechanical Ratings
| Bend radius (stationary min.) | 0.8 in (20 mm) |
|---|
| Bend radius (installation min.) | 0.8 in (20 mm) |
|---|
| Max. pull tension | 19 lbs (8.6 kg) |
|---|
Compliance & Certifications
| Military compliance | MIL-W-76C Type MWP |
|---|
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
|---|
| APAC compliance | China RoHS II (GB/T 26572-2011) |
|---|
| Sustainability | CA Prop 65 |
|---|
| RoHS compliant | Yes |
|---|
Applications
- Use it for inter-connection circuits where a low temp plastic lead wire is required.
- Support internal wiring of computer and electronic equipments.
- Specify it for (Type MW) MIL-W-76C-Low Temp applications.
Belden™ and all associated trademarks are the property of their respective owners.
