Belden 8522 010 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is a 1 conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation in black. This wire is rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL voltage rating of 1000 V RMS and a UL temperature of 80°C.
Belden 8522 010 Key Features
- 1 conductor 18 AWG (16x30) TC - Tinned Copper construction for compact internal wiring runs.
- PVC - Polyvinyl Chloride insulation in black with medium wall PVC insulation.
- Rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL voltage rating of 1000 V RMS.
- Extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
- Shielded: Not Shielded.
Belden 8522 010 Technical Specs
Product Classification & Standards
| Product type | MW-76 |
|---|
| Military compliance | MIL-W-76C Type MWP |
|---|
| Mil spec | MIL-W-76 |
|---|
Physical Construction
| Insulation thickness (nom.) | 0.017 in (0.43 mm) |
|---|
| Insulation diameter (nom.) | 0.08 in (2.0 mm) |
|---|
| Overall cable diameter (nominal) | 0.08 in (2.0 mm) |
|---|
| Bulk cable weight | 7 lbs/1000ft |
|---|
Electrical Characteristics
| Nom. conductor DCR | 6.5 Ohm/1000ft |
|---|
| Max. current | Single Conductor in free air @ 30ºC: 16 A |
|---|
Environmental & Mechanical Ratings
| Operating temperature | -40°C To +80°C |
|---|
| Bend radius (stationary min.) | 0.8 in (20 mm) |
|---|
| Bend radius (installation min.) | 0.8 in (20 mm) |
|---|
| Max. pull tension | 19 lbs (8.6 kg) |
|---|
| Environmental suitability | Outdoor |
|---|
Compliance & Certifications
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
|---|
| APAC compliance | China RoHS II (GB/T 26572-2011) |
|---|
| Sustainability | CA Prop 65 |
|---|
| RoHS compliant | Yes |
|---|
Belden 8522 010 Applications
- Use for inter-connection circuits where a single-conductor lead wire is needed for point-to-point connections.
- For internal wiring of computer and electronic equipments, it helps route power or signal connections within equipment.
- Meets (Type MW) MIL-W-76C-Low Temp applications where this standard is required.
- Suitable for internal wiring of electrical and electronic equipment using a PVC insulated hook-up wire.
Belden™ and all associated trademarks are the property of their respective owners.
