Belden 9104 010 is a Series 59 (RG 59) broadband coaxial cable with a 20 AWG solid BCCS - Bare Copper Covered Steel conductor and a black PVC - Polyvinyl Chloride jacket. It features gas injected FPE-Foamed (Cellular) Polyethylene insulation and is built for 75 Ohm performance. Shielding consists of Duofoil® tri-laminate tape with 100% coverage plus a 65% aluminum braid. The cable is CM rated for indoor general-purpose installations.
Belden 9104 010 Key Features
- Series 59 (RG 59) broadband coaxial construction for CATV and RF signal distribution.
- 20 AWG solid BCCS - Bare Copper Covered Steel conductor.
- Gas injected FPE-Foamed (Cellular) Polyethylene insulation.
- Duofoil® tri-laminate tape shield with 100% coverage plus a 65% aluminum braid.
- Black PVC - Polyvinyl Chloride jacket with CM rating for indoor general-purpose installations.
Belden 9104 010 Technical Specs
Construction & Materials
| Coax construction | Coaxial |
|---|
| Number of elements | 1 |
|---|
| Conductor diameter (nom.) | 0.032 in |
|---|
| Insulation material | PE - Polyethylene (Foam) |
|---|
| Dielectric material | FPE-Foamed (Cellular) Polyethylene |
|---|
| Insulation diameter (nom.) | 0.145 in (3.68 mm) |
|---|
| Insulation color code | White |
|---|
| Shield type | Both, braid over foil |
|---|
| Shield layer 1 | Tape, Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100% |
|---|
| Shield layer 2 | Braid, Aluminum, 65% |
|---|
| Flooded | No not flooded over braid |
|---|
Physical Dimensions & Weight
| Cable diameter (nom.) | 0.237 in (6.02 mm) |
|---|
| Overall cable diameter (nominal) | 0.237 in (6.02 mm) |
|---|
| Bulk cable weight | 23 lbs/1000ft |
|---|
Electrical Characteristics
| Nom. characteristic impedance | 75 Ohm |
|---|
| Impedance | 75 OHM NOMINAL IMPEDANCE |
|---|
| Nom. velocity of prop. | 83% |
|---|
| Nom. capacitance Cond-to-Shield | 16.2 pF/ft (53.1 pF/m) |
|---|
| Nom. Conductor DCR | 44.5 Ohm/1000ft (146 Ohm/km) |
|---|
| Nom. outer Shield DCR | 12 Ohm/1000ft (39 Ohm/km) |
|---|
| UL Voltage Rating | 300 V RMS |
|---|
Performance
| Return loss (min. structural) | 5-1000 MHz: 20 dB |
|---|
| Attenuation (Max.) | 5 MHz: 0.86 dB/100ft; 55 MHz: 2.05 dB/100ft; 211 MHz: 3.80 dB/100ft; 270 MHz: 4.22 dB/100ft; 300 MHz: 4.45 dB/100ft; 350 MHz: 4.80 dB/100ft; 400 MHz: 5.10 dB/100ft; 450 MHz: 5.40 dB/100ft; 550 MHz: 5.95 dB/100ft; 750 MHz: 6.97 dB/100ft; 870 MHz: 7.57 dB/100ft; 1000 MHz: 8.12 dB/100ft |
|---|
Environmental Suitability
| Outdoor | No not outdoor grade material |
|---|
| Environmental suitability | Indoor (Not Riser or Plenum), Indoor |
|---|
| Operating temperature | -40°C To +80°C |
|---|
Mechanical Ratings
| Bend radius (stationary min.) | 2.25 in (57.2 mm) |
|---|
| Bend radius (installation min.) | 2.25 in (57.2 mm) |
|---|
| Max. pull tension | 104 lbs (47.2 kg) |
|---|
Compliance & Certifications
| NEC / UL compliance | Article 800, CATV, CM |
|---|
| CEC / C(UL) compliance | CM |
|---|
| Fire rating | General Purpose (CM, CMG, CMX) |
|---|
| Flammability / reaction to fire | UL1685 UL Loading, IEC 60332-1-2 |
|---|
| CPR compliance | CPR Euroclass: Eca |
|---|
| European directive compliance | EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
|---|
| UK regulation compliance | UKCA Mark |
|---|
| APAC compliance | China RoHS II (GB/T 26572-2011) |
|---|
Belden 9104 010 Applications
- Use it for broadband signal distribution where RG 59 coaxial cable is specified.
- Choose it for Cable Television (CATV) connections and related indoor general-purpose runs.
- Run it for RF drop cable installations where a coax drop is needed between connection points.
- Connect Over-The-Air (OTA) antennas to receiving equipment with this cable.
Belden™ and all associated trademarks are the property of their respective owners.
