Belden 9116SB 010, Coax Shipboard CATV Cable 18 AWG FRNHPO Black

Belden 9116SB 010 is a 75 Ohm SDI coax (RG-6) for digital video and HD-SDI 1080p performance in marine shipboard and offshore environments. It features an 18 AWG solid BCCS - Bare Copper Covered Steel Conductor with gas-injected PE - Polyethylene (Foam) insulation and an LSZH jacket. Shielding uses Duobond® II tri-laminate tape plus an aluminum braid, and the cable is shipboard ABS type approved with CMG-LS compliance.

Belden 9116SB 010 Key Features

• 75 Ohm SDI coax (RG-6) designed for digital video and HD-SDI 1080p performance.
• 18 AWG solid BCCS - Bare Copper Covered Steel Conductor for consistent construction.
• Gas-injected PE - Polyethylene (Foam) insulation with 83% nominal velocity of propagation.
• Duobond® II tri-laminate tape shield plus an aluminum braid for braid over foil shielding.
• LSZH jacket to support limited-smoke requirements.
• Shipboard ABS type approved construction with NEC / UL compliance: Article 800, CMG-LS and CEC / C(UL) compliance: CMG-LS.

Belden 9116SB 010 Technical Specs

Construction & Physical Specs

Coax construction	Coaxial
Series type	6
Number of elements	1
Nom. diameter	0.04 in
Nom. insulation diameter	0.18 in (4.6 mm)
Overall cable diameter (nominal)	0.274 in (6.96 mm)
Bulk cable weight	28 lbs/1000ft
Flooded	No not flooded over braid
Color code	White
Insulation notes	Gas Injected
Shield type	Both, braid over foil
Shield layer 1	Tape, Tri-Laminate (Alum+Poly+Alum), Duobond® II, 100%
Shield layer 2	Braid, Aluminum, 57%
Outer jacket material	PO - Polyolefin

Electrical Characteristics

Nom. capacitance cond-to-shield	16.2 pF/ft (53.1 pF/m)
Nom. conductor DCR	28 Ohm/1000ft (92 Ohm/km)
Nom. outer shield DCR	9 Ohm/1000ft (30 Ohm/km)
UL voltage rating	300 V RMS

Performance (Return Loss & Attenuation)

Return loss 5-1000 MHz	20 dB
Return loss 1000-2250 MHz	15 dB
Return loss 2250-3000 MHz	10 dB
Attenuation (max.) 5 MHz	0.67 dB/100ft
Attenuation (max.) 55 MHz	1.6 dB/100ft
Attenuation (max.) 211 MHz	2.87 dB/100ft
Attenuation (max.) 270 MHz	3.24 dB/100ft
Attenuation (max.) 300 MHz	3.43 dB/100ft
Attenuation (max.) 350 MHz	3.72 dB/100ft
Attenuation (max.) 400 MHz	4 dB/100ft
Attenuation (max.) 450 MHz	4.26 dB/100ft
Attenuation (max.) 5500 MHz	4.71 dB/100ft
Attenuation (max.) 750 MHz	5.59 dB/100ft
Attenuation (max.) 870 MHz	6 dB/100ft
Attenuation (max.) 1000 MHz	6.54 dB/100ft
Attenuation (max.) 1450 MHz	8.3 dB/100ft
Attenuation (max.) 1800 MHz	9.3 dB/100ft
Attenuation (max.) 2250 MHz	10.6 dB/100ft
Attenuation (max.) 3000 MHz	11.9 dB/100ft

Environmental & Mechanical Ratings

Operating	-20°C To +75°C
UL temperature	75°C
Stationary min. bend radius	2.75 in (69.9 mm)
Installation min. bend radius	2.75 in (69.9 mm)
Max. pull tension	126 lbs (57.2 kg)
Environmental suitability	Indoor/Outdoor, Indoor, Outdoor, Sunlight Resistance

Compliance & Certifications

Marine compliance	ABS Type Approval Certificate 19-HS1852547-PDA
Flammability / reaction to fire	UL1685 FT4 Loading, Limited Smoke, FT4, 1202, IEC 60332-1-2, IEC 60332-3-22
CPR compliance	CPR Euroclass: Eca
IEEE compliance	Std. 45 clause 23
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)

Belden 9116SB 010 Applications

• Use it for digital video signal transmission.
• Support HD-SDI 1080p applications with this cable.
• Specify it for ABS approved marine shipboard and offshore use.

Belden™ and all associated trademarks are the property of their respective owners.