Belden 9418 060 is a 4-conductor 18 AWG multi-conductor cable designed for low-voltage signal and control wiring in panels and indoor installations. It uses 19x30 stranded tinned copper conductors with SR-PVC insulation and an overall Beldfoil® tape shield with 100% coverage, plus a 20 AWG (19x32) tinned copper drain wire. A PVC outer jacket and a nominal 0.245 in (6.22 mm) overall diameter support clean routing and consistent handling. UL voltage rating is 300 V (CMG), 300 V (UL AWM 2464).
Belden 9418 060 Key Features
- 4 conductors in 18 AWG for low-voltage signal and control wiring.
- 19x30 stranded tinned copper conductors with SR-PVC - Polyvinyl Chloride (Semi-Rigid) insulation.
- Overall Beldfoil® tape shield with 100% coverage and a 20 AWG (19x32) TC drainwire for shielding continuity.
- PVC - Polyvinyl Chloride outer jacket with a nominal 0.245 in (6.22 mm) overall cable diameter.
- UL voltage rating: 300 V (CMG), 300 V (UL AWM 2464).
Belden 9418 060 Technical Specs
Construction & Physical Specs
| Conductor material | TC - Tinned Copper |
|---|
| Insulation thickness (nom.) | 0.011 in (0.28 mm) |
|---|
| Insulation diameter (nom.) | 0.066 in (1.7 mm) |
|---|
| Color code | Red, Green, Black, White |
|---|
| Jacket thickness (nom.) | 0.035 in (0.89 mm) |
|---|
| Shield type | Tape |
|---|
| Shield material | Bi-Laminate (Alum+Poly) |
|---|
Electrical Characteristics
| Nom. conductor DCR | 6.5 Ohm/1000ft |
|---|
| Nom. capacitance cond-to-cond | 40 pF/ft (130 pF/m) |
|---|
| Nom. capacitance cond-to-other (conds + Shield) | 72 pF/ft (240 pF/m) |
|---|
| Max. current | 5 Amps per Conductor at 25ºC |
|---|
| Nom. outer shield DCR | 8.5 Ohm/1000ft (28 Ohm/km) |
|---|
Environmental & Mechanical Ratings
| UL temperature | 80°C |
|---|
| Operating temperature | -20°C to +80°C |
|---|
| Bend radius (stationary min.) | 2.5 in (64 mm) |
|---|
| Bend radius (installation min.) | 2.5 in (64 mm) |
|---|
| Max. pull tension | 113 lbs (51.3 kg) |
|---|
| Bulk cable weight | 42 lbs/1000ft |
|---|
| Environmental suitability | Indoor (Not Riser or Plenum), Indoor |
|---|
Compliance & Certifications
| NEC / UL compliance | Article 800, CMG |
|---|
| CEC / C(UL) compliance | CMG |
|---|
| AWM compliance | AWM 2464 |
|---|
| Flammability / reaction to fire | UL 1685 FT4 Loading, FT4, IEC 60332-1-2 |
|---|
| CPR compliance | CPR Euroclass: Eca |
|---|
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
|---|
| UK regulation compliance | UKCA Mark |
|---|
| Sustainability | CA Prop 65 |
|---|
| Plenum number | 89418 or 82418 |
|---|
Belden 9418 060 Applications
- Use it for low voltage analog signals (4-20ma, 0-10v, ...) where consistent signal transfer is needed in indoor wiring runs.
- Wire low voltage control (24v, …) circuits in panels to support organized control and signal routing.
- Choose it for line level audio connections where shielded multi-conductor wiring is desired for indoor installations.
- Route voice communications wiring through panels and indoor pathways using this construction.
- Apply it in panel wiring where a multi-conductor design supports clean routing and consistent handling.
Belden™ and all associated trademarks are the property of their respective owners.
