Belden BAV 1350SB 010, Multi Conductor AES EBU Cable 1 FS PR 24 AWG

Belden BAV 1350SB 010 is a digital audio cable designed for AES/EBU and other low-capacitance signal applications. It features 1 pair of 24 conductors using TC - Tinned Copper with PE - Polyethylene (Foam) insulation and a Red & Black color code. For noise rejection and grounding, it uses a Tape shield made of Bi-Laminate (Alum+Poly) with 100% coverage, plus an overall Beldfoil® shield and drain. The LSZH - Low Smoke Zero Halogen (Flame Retardant) jacket and Rated-CMG-LS construction support use in demanding environments, including shipboard installations.

Key Features

• 1 pair construction with 24 conductors and 7x32 stranding for consistent signal cabling.
• Overall Beldfoil® tape shield with 100% coverage and a drain wire for noise rejection and grounding.
• LSZH - Low Smoke Zero Halogen (Flame Retardant) outer jacket.
• Rated-CMG-LS construction.
• Nom. characteristic impedance: 100 Ohm.
• UL voltage rating: 300 V RMS.
• Operating: -30°C to +75°C.

Technical Specs

Construction & Materials

Conductor material	TC - Tinned Copper
Insulation material	PE - Polyethylene (Foam)
Nom. insulation diameter	0.058 in (1.5 mm)
Color code	Red & Black
Notes	HDPE
Outer shield type	Tape
Outer shield material	Bi-Laminate (Alum+Poly)
Outer jacket material	LSZH - Low Smoke Zero Halogen (Flame Retardant)

Physical Specs

Nom. diameter	0.179 in
Bulk cable weight	20 lbs/1000ft (30 kg/km)

Performance & Electrical Characteristics

Nom. velocity of prop.	79%
Frequency [MHz]	0.384, 0.7056, 0.768, 1.024, 1.4112, 1.536, 2.048, 2.8224, 3.072, 4.096, 5.6448, 6.144, 8.192, 11.2896, 12.288, 24.576

Environmental & Mechanical Ratings

UL temperature	75°C
Max. pull tension	16.5 lbs (7.48 kg)
Environmental suitability	Indoor/Outdoor, Indoor, Outdoor, Sunlight Resistance
Flammability / reaction to fire	UL1685 FT4 Loading, Limited Smoke, 1202, IEC 60332-1-2, IEC 60332-3-22

Compliance & Certifications

CPR compliance	CPR Euroclass: Eca
NEC / UL compliance	CMG-LS
CEC / C(UL) compliance	CMG-ST1
IEEE compliance	Std. 45 clause 23
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)

Applications

• Supports shipboard installations, including ABS-listed environments.
• Handles digital audio and analog audio signal runs, including AES/EBU systems.
• Meets low-capacitance signal applications where consistent performance and noise rejection matter.
• Fits instrumentation and control wiring where shielded signal integrity is needed.
• Integrates into EIA RS-232, EIA RS-422, and EIA RS-485 systems.

Belden BAV™ and all associated trademarks are the property of their respective owners.