Belden BAV 1525A 010, Coax CATV Cable 14 AWG SH LDPE Black

Belden BAV 1525A 010 is a Series 11 broadband coax cable (RG 11) built with a 14 AWG solid BCCS - Bare Copper Covered Steel conductor and PE - Polyethylene (Foam) insulation. It uses a dual-layer shield system combining Duobond® II tri-laminate tape (100%) with a 60% aluminum braid, and it is waterblocked with grease. This 75 Ohm coax is rated 300 V and is specified for Outdoor - Water Exposure, Outdoor, UV Resistance, Aerial - When supported by messenger Wire, and Burial environments.

Key Features

• Series 11 broadband coax cable (RG 11) for CATV, RF drop cable, and Over-The-Air (OTA) antenna connections.
• 14 AWG solid BCCS - Bare Copper Covered Steel conductor.
• PE - Polyethylene (Foam) insulation with White color code.
• Dual-layer shielding: Duobond® II tri-laminate tape (Alum+Poly+Alum) at 100% coverage plus 60% aluminum braid.
• Waterblocking: Grease.
• 75 Ohm nominal characteristic impedance; voltage rating: 300 V.
• Environmental suitability: Outdoor - Water Exposure, Outdoor, UV Resistance, Aerial - When supported by messenger Wire, Burial.

Technical Specs

Physical Construction

Overall cable diameter (nominal)	0.393 in (9.98 mm)
Conductor nom. diameter	0.064 in
Nom. insulation diameter	0.280 in (7.11 mm)
Jacket material	PE - Polyethylene
Bulk cable weight	44 lbs/1000ft (65 kg/km)

Electrical Characteristics

Nom. velocity of prop.	83%
Nom. capacitance cond-to-shield	16.3 pF/ft (53.5 pF/m)
Nom. conductor DCR	12 Ohm/1000ft
Nom. outer shield DCR	4.1 Ohm/1000ft (13 Ohm/km)

Performance

Return loss frequency	5 - 1000 MHz
Min. structural return loss	20 dB
Attenuation (Max.)	5 MHz: 0.38 dB/100ft; 55 MHz: 0.96 dB/100ft; 211 MHz: 1.90 dB/100ft; 250 MHz: 2.05 dB/100ft; 270 MHz: 2.13 dB/100ft; 300 MHz: 2.25 dB/100ft; 330 MHz: 2.35 dB/100ft; 350 MHz: 2.42 dB/100ft; 400 MHz: 2.47 dB/100ft; 450 MHz: 2.75 dB/100ft; 500 MHz: 2.90 dB/100ft; 550 MHz: 3.04 dB/100ft; 600 MHz: 3.18 dB/100ft; 750 MHz: 3.65 dB/100ft; 870 MHz: 3.84 dB/100ft; 1000 MHz: 4.35 dB/100ft

Environmental & Mechanical Ratings

Operating temperature	-55°C to +80°C
Bend radius (installation min.)	4.5 in (110 mm)
Max. pull tension	199 lbs (90.3 kg)

Compliance & Certifications

Other standard compliance(s)	ANSI/SCTE 74
Sustainability	CA Prop 65
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)

Applications

• Use in broadband installations that require consistent coax performance across common RF frequencies.
• Support Cable Television (CATV) connections in residential or commercial distribution runs.
• Run RF drop cable to connect service entry points to equipment locations.
• Connect Over-The-Air (OTA) antennas to receiving equipment using a 75 Ohm coax connection.

Belden BAV™ and all associated trademarks are the property of their respective owners.