Belden 1617A 009, RG11 14 SOLID SS FPE Shield PV White 75 OHM

Belden 1617A 009 is a Series 11 RG 11 coaxial cable designed for broadband, CATV, RF drop cable, and Over-The-Air (OTA) antenna runs requiring 75 Ohm performance. It uses a 14 AWG solid BCCS - Bare Copper Covered Steel conductor with PE - Polyethylene (Foam) insulation and a PVC - Polyvinyl Chloride jacket. The Quad Shield (F/B+F/B) construction combines foil and aluminum braid layers to help reduce interference. It is CM rated with a UL voltage rating of 300 V (CM) for indoor general-purpose installations.

Key Features

• Series 11 RG 11 coaxial construction for broadband and CATV signal distribution.
• 75 Ohm nominal characteristic impedance for consistent coax performance.
• Quad Shield (F/B+F/B) design with foil and aluminum braid layers to help reduce interference.
• 14 AWG solid BCCS - Bare Copper Covered Steel conductor with PE - Polyethylene (Foam) insulation.
• PVC - Polyvinyl Chloride jacket with CM rating and UL voltage rating of 300 V (CM).

Technical Specs

Product Identification

Part number	1617A 009
Brand	Belden
Coax type	RG 11
Series type	11
Plenum number	1617AP

Construction & Physical Specs

Overall cable diameter (nominal)	0.407 in (10.3 mm)
Conductor nominal diameter	0.064 in
Nom. insulation diameter	0.280 in (7.11 mm)
Insulation color code	White
Shield type	Quad Shield (F/B+F/B)
Shield layer 1	Tape, Tri-Laminate (Alum+Poly+Alum), Duobond® II, 100%
Shield layer 2	Braid, Aluminum, 60%
Shield layer 3	Tape, Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100%
Shield layer 4	Braid, Aluminum, 40%
Bulk cable weight	60 lbs/1000ft

Performance & Electrical Characteristics

Nom. velocity of prop.	83%
Nom. capacitance Cond-to-Shield	16.3 pF/ft (53.5 pF/m)
Nom. conductor DCR	12 Ohm/1000ft
Nom. outer shield DCR	3 Ohm/1000ft (9.8 Ohm/km)
Return loss	5 - 1000 MHz: 20 dB (min. structural return loss)
Attenuation (Max.)	5 MHz: 0.38 dB/100ft; 55 MHz: 0.96 dB/100ft; 211 MHz: 1.90 dB/100ft; 250 MHz: 2.05 dB/100ft; 270 MHz: 2.13 dB/100ft; 300 MHz: 2.25 dB/100ft; 330 MHz: 2.35 dB/100ft; 350 MHz: 2.42 dB/100ft; 400 MHz: 2.60 dB/100ft; 450 MHz: 2.75 dB/100ft; 500 MHz: 2.90 dB/100ft; 550 MHz: 3.04 dB/100ft; 600 MHz: 3.18 dB/100ft; 750 MHz: 3.65 dB/100ft; 870 MHz: 4.06 dB/100ft; 1000 MHz: 4.35 dB/100ft

Environmental & Mechanical Ratings

Operating	-40°C to +75°C
UL temperature	75°C
Installation min. bend radius	4.1 in (100 mm)
Max. pull tension	308 lbs (140 kg)
Environmental suitability	Indoor (Not Riser or Plenum), Indoor, Aerial - Black only, When supported by messenger Wire

Compliance & Certifications

NEC / UL compliance	CM, CATV
CEC / C(UL) compliance	CM
Flammability / reaction to fire	UL1685 UL Loading
CPR compliance	CPR Euroclass: Eca
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)
Other standard compliance(s)	ANSI/SCTE 74
Sustainability	CA Prop 65

Applications

• Supports broadband distribution where stable coax performance is required.
• Used for Cable Television (CATV) signal runs.
• Fits RF drop cable installations.
• Connects Over-The-Air (OTA) antenna feeds to equipment.

Belden™ and all associated trademarks are the property of their respective owners.