Belden 3095A F2V ControlBus Coaxial RG11 14 AWG BCCS FEP PVDF Cubierta
SKU:Belden 3095A F2V
$1,986.00
● En stock
Descripción
El cable coaxial RG-11 Belden 3095A F2V ControlBus™ incorpora un conductor sólido de acero recubierto de cobre desnudo de 14 AWG, con aislamiento de FEP espumado y una cubierta total de cubierta PVDF. Este cable con clasificación CMP, apantallado, está marcado para 300 V y 150°C. Incluye una pantalla total de Duofoil® + 60% de trenza de aluminio + Duofoil® + 40% de trenza de aluminio.
Aplicaciones
- Úselo en instalaciones coaxiales RG-11 de ControlBus™ donde se requiera una construcción apantallado.
- Elíjalo para instalaciones que requieran cable con clasificación CMP.
- Instálelo donde el marcado del cable indique 300 V y 150°C.
Especificaciones
| Attribute | Value |
|---|---|
| Coax construction | Coax RG11 |
| RG type | 11 |
| Number of coax | 1 |
| Number of Conductors | 1 |
| Conductor nominal diameter | 0.064 in |
| Insulation nominal diameter | 0.28 in |
| Jacket nominal diameter | 0.387 in |
| Nominal characteristic impedance | 100 Ohm |
| Nominal characteristic tolerance | ± 3 Ohm |
| Nom. capacitance (Conductor to Shield) | 16.5 pF/ft |
| Nominal inductance | 0.097 µH/ft |
| Nominal delay | 1.2 ns/ft |
| Nominal velocity of propagation (VP) [%] | 82% |
| UL Voltage Rating | 300 V RMS |
| Nominal conductor DCR | 11 Ohm/1000ft |
| Nominal outer shield DCR | 3.9 Ohm/1000ft |
| Outer conductor DCR | 3.9 Ohm/1000ft |
| Insertion loss @ 1 MHz | 0.17 dB/100ft |
| Insertion loss @ 2 MHz | 0.22 dB/100ft |
| Insertion loss 5 MHz | 0.28 dB/100ft |
| Insertion loss @ 10 MHz | 0.4 dB/100ft |
| Insertion loss @ 20 MHz | 0.6 dB/100ft |
| Insertion loss @ 50 MHz | 1.2 dB/100ft |
| Insertion loss @ 100 MHz | 1.7 dB/100ft |
| Insertion loss @ 200 MHz | 2.5 dB/100ft |
| Insertion loss @ 300 MHz | 3.04 dB/100ft |
| Insertion loss @ 400 MHz | 3.5 dB/100ft |
| Phase delay distortion f/B 0.5 | -0.6 |
| Phase delay distortion f/B 1 | -0.46 |
| Phase delay distortion f/B 1.5 | 0 |
| Phase delay distortion f/B 2 | 0.17 |
| Phase delay distortion f/B 2.5 | 0.3 |
| Structural return loss @ 1 MHz | 20 dB |
| Tilt 5 to 10 MHz | .42 dB/100 M |
| Tilt 10 to 20 MHz | .58 dB/100 M |
| SLR | SLR Min. 20dB (5MHz - 50MHz) |
| UL Temperature Rating | 150°C |
| Operating Temperature Range | -20°C To +150°C |
| Bulk cable weight | 68 lbs/1000ft |
| Maximum recommended pulling tension | 309 lbs |
| Minimum minor axis bend radius | 4 in |
| NEC articles | Article 800 |
| NEC / UL compliance | CMP |
| CEC / C(UL) compliance | CMP |
| UL flammability | NFPA 262 |
| CSA flammability | FT6 |
| EU Directive 2000/53/EC (ELV) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU directive compliance | EU Directive 2003/11/EC (BFR) |
| MII Order #39 (China RoHS) | Yes |
| Suitability - burial | Yes |
| Suitability - Outdoor | Yes |
| Non-Plenum number | 3094A |
| Item Type | Belden Coaxial Cable RG11 |
| Other Part Numbers | 3095A F2V, 3095A F2V100, 3095A F2V250, 3095A F2V500, 3095A F2V1000 |
| Priced Per | FT |
Documentos
Las imágenes son solo de referencia. Las especificaciones pueden cambiar sin previo aviso — verifique la idoneidad para su aplicación antes de comprar. La documentación del fabricante prevalece.
¿Necesita un corte a medida, precio por volumen o una ficha técnica?
Nuestro equipo cotiza largos personalizados y pedidos por volumen, normalmente el mismo día.