Belden 5202F1 010, Multi Conductor 4C 16 AWG PVC FS PVC Black

Belden 5202F1 010 is a 4-conductor security & sound cable with 4-16 AWG stranded tinned copper conductors, PVC insulation, and a black PVC jacket. It includes waterblock tape plus an overall Beldfoil® tape shield with an 18 AWG (19x30) TC drain wire to support noise rejection in demanding environments. Rated-CMG-FPL-PLTC and UL listed for Article 725, Article 760, and Article 800 applications, it is suited for indoor/outdoor use with sunlight resistance, oil resistance, and burial suitability.

Key Features

• 4-conductor construction with 4-16 AWG stranded tinned copper conductors.
• PVC insulation and a black PVC jacket.
• Overall Beldfoil® tape shield with 100% coverage and an 18 AWG (19x30) TC drain wire.
• Waterblock tape for waterblocking.
• Rated-CMG-FPL-PLTC and UL listed for Article 725, Article 760, and Article 800 applications.
• Environmental suitability includes indoor, outdoor, sunlight resistance, oil resistance, and burial.

Technical Specs

Construction & Materials

Conductor stranding	7x24
Insulation thickness	0.007 in (0.18 mm)
Insulation diameter	0.073 in (1.9 mm)
Color code	Black, White, Red, Green
Shield type	Tape
Shield material	Bi-Laminate (Alum+Poly)
Jacket thickness	0.042 in (1.1 mm)
Overall diameter	0.295 in (7.49 mm)

Electrical Characteristics

UL voltage rating	300 V
Nom. conductor DCR	4.35 Ohm/1000ft (14.3 Ohm/km)
Nom. capacitance cond-to-cond	43 pF/ft (140 pF/m)
Max. current	9 Amps per Conductor at 25ºC
Nom outer shield DCR	4.5 Ohm/1000ft (15 Ohm/km)

Environmental & Mechanical Ratings

UL temperature	90°C
Operating temperature	-20°C To +90°C
Stationary min. bend radius	2.95 in (74.9 mm)
Installation min. bend radius	2.95 in (74.9 mm)
Max. pull tension	165 lbs (74.8 kg)
Bulk cable weight	67 lbs/1000ft (100 kg/km)

Compliance, Flammability & Sustainability

NEC / UL compliance	Article 725, Article 760, Article 800, CMG, FPL, PLTC
CEC / C(UL) compliance	CMG
Flammability / reaction to fire	UL1685 FT4 loading, FT4, IEEE 1202 FT4
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
Sustainability	Product Lens™, Environmental Product Declaration (EPD) Available

Applications

• Use in security system installations where shielded, waterblocked cabling is needed in demanding environments.
• Choose for intercom/PA wiring runs that benefit from an overall tape shield and drain wire.
• Support audio/speaker connections in locations where noise rejection is important.
• Fit power-limited controls where CMG/FPL/PLTC ratings and NEC/UL article listings are required.
• Install in noisy & wet locations supported by the cable’s stated suitability.
• Run in below-grade duct applications where burial suitability is required.

Belden™ and all associated trademarks are the property of their respective owners.