Belden 8219 010, Coax RG 58A U Type Black

Belden 8219 010 is an RG-58A/U type coaxial cable designed for wireless transmission. It features a 20 AWG (19x32) TC - Tinned Copper conductor with PE - Polyethylene (Foam) insulation and a 95% Tinned Copper (TC) braid shield. A PVC - Polyvinyl Chloride jacket in Black provides protection, and the overall cable diameter (nominal) is 0.193 in (4.90 mm). Key electrical details include a nom. characteristic impedance of 54 Ohm and a UL voltage rating of 300 V (CM), 30 V (UL AWM 1354).

Belden 8219 010 Key Features

• RG type: 58 coaxial construction for wireless transmission applications.
• 20 AWG (19x32) TC - Tinned Copper conductor for a consistent signal path.
• PE - Polyethylene (Foam) insulation with White insulation color code.
• 95% Tinned Copper (TC) braid shield to support signal integrity.
• PVC - Polyvinyl Chloride jacket in Black with an overall cable diameter (nominal) of 0.193 in (4.90 mm).
• UL voltage rating: 300 V (CM), 30 V (UL AWM 1354).

Belden 8219 010 Technical Specs

Electrical & Physical Specs

Coax construction	Coaxial
Nom. conductor diameter	0.037 in
Nom. insulation diameter	0.116 in (2.95 mm)
Outer shield type	Braid
Flooded	No not flooded over braid

Performance & Electrical Characteristics

Nom. velocity of prop.	76%
Nom. capacitance cond-to-shield	26.0 pF/ft (85.3 pF/m)
Nom. conductor DCR	8.8 Ohm/1000ft
Nom. outer shield DCR	4.1 Ohm/1000ft (13 Ohm/km)
Attenuation (nominal) 1 MHz	0.4 dB/100ft
Attenuation (nominal) 10 MHz	1.3 dB/100ft
Attenuation (nominal) 50 MHz	3.1 dB/100ft
Attenuation (nominal) 100 MHz	4.5 dB/100ft
Attenuation (nominal) 200 MHz	6.6 dB/100ft
Attenuation (nominal) 400 MHz	10.0 dB/100ft
Attenuation (nominal) 700 MHz	14.2 dB/100ft
Attenuation (nominal) 900 MHz	16.6 dB/100ft
Attenuation (nominal) 1000 MHz	18.1 dB/100ft

Environmental & Mechanical Ratings

UL temperature	80°C
Operating temperature	-40°C to +80°C
Installation min. bend radius	1.9 in (48 mm)
Max. pull tension	50 lbs (23 kg)
Bulk cable weight	26 lbs/1000ft
Environmental suitability	Outdoor - Aerial, Indoor, Outdoor, UV Resistance, Aerial - When supported by messenger Wire

Compliance & Certifications

NEC / UL compliance	CM
CEC / C(UL) compliance	CM
AWM compliance	AWM 1354
Flammability / reaction to fire	UL1685 UL Loading, UN ECE R118.02
Sustainability	CA Prop 65
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
Other standard compliance(s)	P-MSHA-SC-182/5

Belden 8219 010 Applications

• Point-to-point and point-to-multipoint wireless antenna communication uses this cable as a coaxial feed line between equipment and antennas.
• Wireless microphones use it to provide a coax connection for RF signal transmission.
• Two-Way Radios commonly use it to connect RF components in radio communication setups.
• Amateur (Ham) Radio systems use it for RF signal routing between radio equipment and antennas.
• Low Power FM installations apply it where coaxial cable is required for RF transmission paths.
• GPS systems use it to carry RF signals between GPS antennas and receiving equipment.
• RFID (Radio Frequency Identification) setups use it to connect RFID antennas and related RF hardware.

Belden™ and all associated trademarks are the property of their respective owners.