Belden 8522 009, Hook Up Wire 1C 18 AWG Tinned Copper PVC

Belden 8522 009 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is a 1-conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation in a medium wall construction. This wire is rated 1000 V RMS and 80°C, with a max. current of Single Conductor in free air @ 30ºC: 16 A. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.

Belden 8522 009 Key Features

• It features a 1 conductor 18 AWG (16x30) TC - Tinned Copper construction for low temp plastic lead wire builds.
• PVC - Polyvinyl Chloride insulation is provided in a medium wall construction.
• It is rated 1000 V RMS and 80°C for electrical and electronic wiring needs.
• The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.

Belden 8522 009 Technical Specs

Construction & Materials

Number of conductors	1
Conductor size	18 AWG
Stranding	16x30
Conductor material	TC - Tinned Copper
Insulation material	PVC - Polyvinyl Chloride
Insulation color	White
Shielding	Not Shielded
Type	TYPE MW MIL-W-76C-PVC

Dimensions & Weight

Nom. thickness	0.017 in (0.43 mm)
Nom. insulation diameter	0.08 in (2.0 mm)
Overall cable diameter (nominal)	0.08 in (2.0 mm)
Bulk cable weight	7 lbs/1000ft

Electrical Characteristics

Nom. conductor DCR	6.5 Ohm/1000ft
Max. current	Single Conductor in free air @ 30ºC: 16 A

Environmental & Mechanical Ratings

Operating temperature	-40°C To +80°C
Stationary min. bend radius	0.8 in (20 mm)
Installation min. bend radius	0.8 in (20 mm)
Max. pull tension	19 lbs (8.6 kg)
Environmental suitability	Outdoor

Compliance & Certifications

Military compliance	MIL-W-76C Type MWP
Sustainability	CA Prop 65
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
RoHS compliant	Yes

Applications

• It is designed for inter-connection circuits where a low temp plastic lead wire is required.
• For equipment builds and assemblies, it supports internal wiring of computer and electronic equipments.
• It is specified for (Type MW) MIL-W-76C-Low Temp applications.
• It is used for internal wiring of electrical and electronic equipment.

Belden™ and all associated trademarks are the property of their respective owners.