Belden 8524 002, Hook Up Wire 1C 22 AWG Tinned Copper PVC

Belden 8524 002 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipment. It is a 1-conductor 22 AWG (7x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation in Red. This wire is rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL Voltage Rating of 1000 V RMS and a UL temperature of 80°C. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.

Belden 8524 002 Key Features

• TYPE MW MIL-W-76C-PVC 1000V 80C rating for specified electrical and temperature performance.
• 1-conductor 22 AWG (7x30) TC - Tinned Copper construction for internal wiring and inter-connection circuits.
• PVC - Polyvinyl Chloride insulation in Red.
• Extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
• Operating temperature: -40°C to +80°C.
• Shielded: Not Shielded.
• European directive compliance: EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE); RoHS compliant: Yes; Sustainability: CA Prop 65.

Belden 8524 002 Technical Specs

Construction & Materials

Number of conductors	1
Conductor size	22 AWG
Stranding	7x30
Conductor material	TC - Tinned Copper
Insulation material	PVC - Polyvinyl Chloride

Dimensions & Weight

Nom. thickness	0.017 in (0.43 mm)
Nom. insulation diameter	0.064 in (1.6 mm)
Overall cable diameter (nominal)	0.064 in (1.6 mm)
Bulk cable weight	4 lbs/1000ft

Electrical Characteristics

UL Voltage Rating	1000 V RMS
Nom. conductor DCR	16 Ohm/1000ft
Max. current	Single Conductor in free air @ 30ºC: 9.0 A

Mechanical Ratings

Bend radius (stationary min.)	0.64 in (16 mm)
Bend radius (installation min.)	0.64 in (16 mm)
Max. pull tension	11 lbs (5.0 kg)

Temperature & Environmental

UL temperature	80°C
Environmental suitability	Outdoor

Compliance & Certifications

Military compliance	MIL-W-76C Type MWP
Mil spec	MIL-W-76
Product type	MW-76

Applications

• Supports inter-connection circuits where a low temp plastic lead wire is required.
• Used for internal wiring of computer and electronic equipment.
• Meets (Type MW) MIL-W-76C-Low Temp application requirements.

Belden™ and all associated trademarks are the property of their respective owners.