Belden 9460 060U, Multi Pair Cable 1 Pair 18 AWG PE PVC Jacket

Belden 9460 060U is a 1 pair 18 AWG control, instrumentation, and audio cable designed for low-voltage signal transmission in panel wiring, computer communication, and line level audio. It features 18AWG (16x30) tinned copper conductors with PE insulation and an overall Beldfoil® shield for noise rejection. A PVC outer jacket with CM rating supports indoor general-purpose installations, while the bonded jacket and shield are designed to strip cleanly on automatic stripping equipment.

Belden 9460 060U Key Features

• The 1 pair 18 AWG construction supports control, instrumentation, and audio signal wiring.
• 18AWG (16x30) tinned copper conductors with PE insulation.
• An overall Beldfoil® shield provides noise rejection.
• The bonded jacket and shield help enable clean removal on automatic stripping equipment.
• Foil-in construction positions the drain wire on the inside of the shield.
• A PVC outer jacket with CM rating supports indoor general-purpose installations.

Belden 9460 060U Technical Specs

Construction & Materials

Number of pairs	1
Conductor size	18 AWG
Stranding	16x30
Conductor material	TC - Tinned Copper
Insulation material	PE - Polyethylene
Nom. thickness (insulation)	0.018 in (0.46 mm)
Nom. insulation diameter	0.082 in (2.1 mm)
Color code	Black & Clear
Shield type	Tape
Shield material	Bi-Laminate (Alum+Poly)
Shield coverage	100%
Drainwire type	20 AWG (7x28) TC
Outer jacket material	PVC - Polyvinyl Chloride
Nom. thickness (jacket)	0.030 in (0.76 mm)

Physical Dimensions & Weight

Nom. diameter	0.230 in (5.84 mm)
Overall cable diameter (nominal)	0.230 in (5.84 mm)
Bulk cable weight	34 lbs/1000ft

Performance & Electrical Characteristics

Nom. conductor DCR	6.5 Ohm/1000ft
Nom. capacitance cond-to-cond	29.8 pF/ft (97.8 pF/m)
Nom. capacitance cond-to-other (conds + Shield)	44 pF/ft (140 pF/m)
Nom. characteristic impedence	57 Ohm
Nom. inductance	0.18 μH/ft (0.59 μH/m)
Max. current	5.2 Amps per Conductor at 25ºC
UL voltage rating	300 V (CM)

Environmental & Mechanical Ratings

UL temperature	60°C
Operating temperature	-20°C to +60°C
Bend radius (stationary min.)	2.3 in (58 mm)
Bend radius (installation min.)	2.3 in (58 mm)
Max. pull tension	62 lbs (28 kg)
Environmental suitability	Indoor (Not Riser or Plenum), Indoor
Flammability / reaction to fire	UL 1685 UL loading , IEC 60332-1-2

Compliance & Certifications

NEC / UL compliance	Article 800, CM
CEC / C(UL) compliance	CM
CPR compliance	CPR Euroclass: Eca
Sustainability	CA Prop 65
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)

Belden 9460 060U Applications

• Use it with automatic stripping equipments where clean jacket and shield removal is needed.
• Support low voltage analog signals (4-20ma, 0-10v, ...) in control and instrumentation circuits.
• Use it for low voltage digital control (24v, …) in automation and control wiring.
• Connect line level audio signals.
• Fit computer communication signal wiring where shielded signal cable is required.
• Install it for panel wiring in indoor installations.

Belden™ and all associated trademarks are the property of their respective owners.