Belden 9L28040 008 Flat Gray Ribbon cable .050 Pitch PVC Ins
Descripción
Belden 9L28040 008 flat gray ribbon cable es una cable de paso 0,050" en la serie 9L280XX. Presenta un diseño de 40 conductor con cobre estañado de 28 AWG (7x36) y aislamiento PVC .
Especificaciones técnicas
| Marca | Belden |
|---|---|
| Número de pieza | 9L28040 008 |
| Serie | Serie 9L280XX |
| cable Tipo | Cinta gris plana cable |
| Alquitrán | .050" |
| conductores | 40 conductor |
| alambre Tamaño | 28 AWG (7x36) |
| conductor Material | Cobre estañado |
| Aislamiento | PVC aislamiento |
| Color | Gray |
Aplicaciones
- Soporta el enrutamiento organizado de múltiplesconductor cuando se prefiere un formato de cinta plana para una gestión cable consistente.
- Simplifica la terminación e identificación durante las tareas de cableado al mantener conductores alineados en una estructura cable plana.
- Cumple con instalaciones que requieren una cinta de paso de 0,050" cable para adaptarse a las necesidades de espaciado en cable conjuntos.
Especificaciones
| Attribute | Value |
|---|---|
| Series | 9L280XX Series |
| Construction | Standard flat, ie gray etc |
| Jacketed | Cable has No Jacket |
| Shield | No,Cable has No Shield |
| Color | Gray |
| Conductor spacing | .050 +/- .002 in |
| Pitch (c-c spacing) | .050 inch center to center |
| Conductor spacing center-center outside | 1.950 +/- .011 in |
| OuterJacket1, nominal width | 2.000 +/- .011 in |
| OuterJacket1, nom thick flat section | 0.035 in |
| Nominal conductor DCR | 68.2 Ohm/1000ft |
| Min insulation resistance | > 10,000 MOhm |
| Max. recommended current [A] | 1 Amp per Conductor at 20ºC |
| Dielectric withstand voltage | 2000 V |
| UL Voltage Rating | 300 V |
| Nominal delay | 1.4 ns/ft |
| Nominal velocity of propagation (VP) [%] | 72% |
| Capacitance @ 1 kHz (GSG) | 18 pF/ft |
| Capacitance @ 1 MHz (GS) | 10 pF/ft |
| Capacitance @ 1 MHz (GSG) | 15 pF/ft |
| Inductance @ 1 MHz (GS) | 0.29 µH/ft |
| Inductance @ 1 MHz (GSG) | 0.2 µH/ft |
| Impedance (GS) | 150 Ohm (GS) |
| Impedance (GSG) | 105 Ohm (GSG) |
| Impedance notes | GS=Ground-Signal Mode; GSG=Ground-Signal-Ground Mode |
| Nom. insertion loss 10 MHz | 2.8 dB/100ft |
| Nom. insertion loss 20 MHz | 4.8 dB/100ft |
| Nom. insertion loss 30 MHz | 6.5 dB/100ft |
| Nom. insertion loss 40 MHz | 8.3 dB/100ft |
| Nom. insertion loss 50 MHz | 9.8 dB/100ft |
| Nom. insertion loss 60 MHz | 12 dB/100ft |
| Nom. insertion loss 70 MHz | 13 dB/100ft |
| Nom. insertion loss 80 MHz | 14 dB/100ft |
| Nom. insertion loss 90 MHz | 15.8 dB/100ft |
| Nom. insertion loss 100 MHz | 17 dB/100ft |
| Unbalanced crosstalk (10 ft. sample length) | Typical unbalanced NEXT % 4.8; Typical unbalanced FEXT % 7; Typical cross talk pulse rise time (ns) 3 ns; Typical unbalanced NEXT % 3.5; Typical unbalanced FEXT % 4.7; Typical cross talk pulse rise time (ns) 5 ns; Typical unbalanced NEXT % 3; Typical unbalanced FEXT % 3; Typical cross talk pulse rise time (ns) 7 ns |
| Minimum minor axis bend radius | 3 in |
| Bulk cable weight | 52 lbs/1000ft |
| Plenum (Y/N) | No |
| Suitability - indoor | Yes |
| CSA AWM compliance | I A |
| EU Directive 2000/53/EC (ELV) | Yes |
| EU Directive 2003/96/EC (BFR) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU directive compliance | EU Directive 2003/11/EC (BFR) |
| EU CE mark | Yes |
| CA Prop 65 (CJ for Wire and Cable) | Yes |
| MII Order #39 (China RoHS) | Yes |
| Item Type | Belden Multi Conductor Cable |
| Other Part Numbers | 9L28040 008100, 9L28040 008250, 9L28040 008500, 9L28040 0081000, UPC 612825221692 |
| Priced Per | FT |
Documentos
Las imágenes son solo de referencia. Las especificaciones pueden cambiar sin previo aviso — verifique la idoneidad para su aplicación antes de comprar. La documentación del fabricante prevalece.
¿Necesita un corte a medida, precio por volumen o una ficha técnica?
Nuestro equipo cotiza largos personalizados y pedidos por volumen, normalmente el mismo día.