Corning 050502T5120007M, Fiber Optic Jumper 2F LC Duplex OM3 7 Meters
SKU:050502T5120007M
● En stock
Descripción
Corning 050502T5120007M is a 7 m (22.96 ft) OM3 multimode fiber optic jumper with a two-fiber, tight-buffered design and LC duplex to LC duplex connectivity. It features an aqua outer jacket with aqua boots for OM3 identification in general building applications and riser pathways. This jumper is rated riser (OFNR) and is free of hazardous substances according to RoHS 2011/65/EU. Typical insertion loss is 0.35 dB on both ends, with wavelengths listed as 850 nm / 1300 nm.
Key Features
- Two-fiber, tight-buffered construction for multimode jumper builds.
- LC duplex connectors on both ends (LC duplex to LC duplex).
- Aqua outer jacket and aqua boots to support OM3 identification.
- Riser (OFNR) flame rating for in-building riser pathways.
- Typical insertion loss of 0.35 dB on both ends.
- Free of hazardous substances according to RoHS 2011/65/EU.
Technical Specs
| Product Number | 050502T5120007M |
|---|---|
| Length | 7 m (22.96 ft) |
| Cable assembly type | Two Fiber |
| Cable type | Tight-Buffered |
| Fiber type | Multimode |
| Fiber category | 50 μm MM (OM3) |
| Fiber core diameter | 50 μm |
| Fiber count | 2 |
| Fiber code | T |
| Performance option code | 80 |
| Wavelengths | 850 nm / 1300 nm |
| Maximum attenuation | 2.8 dB/km / 1.0 dB/km |
| Fiber compliance | IEC 60793-2-10 |
| Serial 1 Gigabit Ethernet | 1000 m / 600 m |
| Serial 10 Gigabit Ethernet | 300 m / - |
| Minimum effective modal bandwidth (EMB) | 2000 MHz*km / - |
| Min. overfilled launch (OFL) bandwidth | 1500 MHz*km / 500 MHz*km |
| Outer jacket color | Aqua |
| Nominal outer diameter | 4 mm (0.16 in) |
| Connector A type | LC duplex |
| Connector A ferrule material | Ceramic |
| Connector A boot color | Aqua |
| Connector A housing color | Black |
| Connector A housing material | Composite |
| Connector B type | LC duplex |
| Connector B ferrule material | Ceramic |
| Connector B boot color | Aqua |
| Connector B housing color | Black |
| Installation methods | General Building Applications Riser |
| Units per delivery | 1/1 |
| Furcation (A) leg diameter | 2 mm (0.08 in) |
| Furcation (A) leg length | 254 mm -0 / +38.1mm (10 in -0 / +1.5in) |
| Furcation (A) plug type | Heat-shrink sleeve |
| Furcation (A) plug height | 5.5 mm (0.22 in) |
| Furcation (A) plug width | 3.5 mm (0.14 in) |
| Furcation (A) plug depth | 25.4 mm (1 in) |
| Furcation (B) leg diameter | 2 mm (0.08 in) |
| Furcation (B) leg length | 254 mm -0 / +38.1mm (10 in -0 / +1.5in) |
| Furcation (B) plug type | Heat-shrink sleeve |
| Furcation (B) plug height | 5.5 mm (0.22 in) |
| Furcation (B) plug width | 3.5 mm (0.14 in) |
| Furcation (B) plug depth | 25.4 mm (1 in) |
Applications
- Use in general building applications where OM3 multimode fiber jumpers are needed for in-building connectivity.
- Install in riser pathways where a riser (OFNR) flame rating is required.
- Support multimode links at 850 nm / 1300 nm in environments using LC duplex connectivity.
Las imágenes son solo de referencia. Las especificaciones pueden cambiar sin previo aviso — verifique la idoneidad para su aplicación antes de comprar. La documentación del fabricante prevalece.
¿Necesita un corte a medida, precio por volumen o una ficha técnica?
Nuestro equipo cotiza largos personalizados y pedidos por volumen, normalmente el mismo día.