Corning 787802GD120008M, Edge Uniboot Jumper Standard LCU SM 2F 8 Meters

Corning 787802GD120008M is an interconnect edge uniboot jumper for data center environments, built with 2 fibers of bend-improved single-mode (OS2) and a yellow riser (OFNR) jacket. It features an LC Uniboot to LC Uniboot interface with UPC polish on both ends for consistent connectivity. With a minimum bend radius of 10 mm (0.39 in) and an 8 m (26.24 ft) length, it supports routing through tight pathways in general building applications.

Technical Specs

Product number	787802GD120008M
Application	Data Center
Cable type	Interconnect
Cable assembly type	Two Fiber
Flame rating	Riser (OFNR)
Installation methods	General Building ApplicationsRiser
Fiber count	2
Fiber category	Bend-improved SM (OS2)
Fiber category (additional)	OS2
Fiber type	Single-Mode Ultra-Bendable Fiber
Fiber type (additional)	Single-mode (OS2) / 250 μm
Fiber name	Bend-Improved Single-mode (OS2)
Fiber code	Z
Performance option code	01
Maximum attenuation	0.4 dB/km / 0.4 dB/km / 0.3 dB/km
Wavelengths	1310 nm / 1383 nm / 1550 nm
Fiber compliance	ITU-T G.652.D and ITU-T G.657.A1
Connector A type	LC Uniboot
Connector A polish	UPC
Connector A boot color	Blue
Connector A housing color	Blue
Connector A housing material	Composite
Connector A ferrule material	Ceramic
Connector B type	LC Uniboot
Connector B polish	UPC
Connector B boot color	Blue
Connector B housing color	Blue
Connector B ferrule material	Ceramic
Outer jacket color	Yellow
Nominal outer diameter	2 mm (0.08 in )
Minimum bend radius	10 mm (0.39 in)
Length	8 m (26.24 ft)
RoHS	Free of hazardous substances according to RoHS 2011/65/EU

Applications

• Use in data center interconnects where an LC Uniboot to LC Uniboot jumper is needed between compatible ports.
• Route through tight pathways using bend-improved single-mode (OS2) fiber and a 10 mm (0.39 in) minimum bend radius.
• Install in general building applications where a riser (OFNR) rated jacket is required.

Shipping & Availability

Units per delivery	1/1