Belden 1617AP 009, RG11 CATV 75 PVC Black Shielded 14 Solid SSC

Belden 1617AP 009 is a Series 11 RG 11 coaxial cable designed for broadband coax distribution in plenum spaces. It features a 14 AWG solid BCCS - Bare Copper Covered Steel conductor, FEP - Fluorinated Ethylene Propylene (Foam) insulation, and a PVDF - Polyvinylidene Fluoride jacket. The Quad Shield (F/B+F/B) design supports 75 Ohm characteristic impedance, 83% velocity of propagation, and a UL Voltage Rating of 300 V (CMP). Return loss is rated at 20 dB from 5 - 1000 MHz and 15 dB from 1000 - 2250 MHz.

Key Features

• Series 11 RG 11 coaxial construction for broadband coax distribution.
• 14 AWG solid BCCS - Bare Copper Covered Steel conductor.
• FEP - Fluorinated Ethylene Propylene (Foam) insulation with White color code.
• Quad Shield (F/B+F/B) shielding for coax signal distribution.
• PVDF - Polyvinylidene Fluoride outer jacket with CMP fire rating for plenum spaces.

Technical Specs

Construction & Materials

Coax construction	Coaxial
Coax type	RG 11
Series type	11
Conductor size	14 AWG
Conductor stranding	Solid
Conductor material	BCCS - Bare Copper Covered Steel
Conductor nominal diameter	0.064 in
Insulation material	FEP - Fluorinated Ethylene Propylene (Foam)
Insulation nominal diameter	0.274 in (6.96 mm)
Insulation color code	White
Shield type	Quad Shield (F/B+F/B)
Shield layer 1	Tape, Tri-Laminate (Alum+Poly+Alum), Duobond® II, 100%
Shield layer 2	Braid, Aluminum, 60%
Shield layer 3	Tape, Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100%
Shield layer 4	Braid, Aluminum, 40%
Outer jacket material	PVDF - Polyvinylidene Fluoride
Nominal jacket diameter	0.372 in (9.45 mm)
Overall cable diameter (nominal)	0.372 in (9.45 mm)

Electrical Characteristics

Characteristic impedance (nom.)	75 Ohm
Velocity of propagation (nom.)	83%
Capacitance Cond-to-Shield (nom.)	16.3 pF/ft (53.5 pF/m)
Conductor DCR (nom.)	12 Ohm/1000ft
Outer Shield DCR (nom.)	3 Ohm/1000ft (9.8 Ohm/km)
UL Voltage Rating	300 V (CMP)

Performance (Return Loss & Attenuation)

Return loss	5 - 1000 MHz: 20 dB (min. structural return loss)
Return loss	1000 - 2250 MHz: 15 dB (min. structural return loss)
Attenuation (Max.)	5 MHz: 0.38 dB/100ft
Attenuation (Max.)	55 MHz: 0.96 dB/100ft
Attenuation (Max.)	211 MHz: 1.90 dB/100ft
Attenuation (Max.)	240 MHz: 2.43 dB/100ft
Attenuation (Max.)	270 MHz: 2.59 dB/100ft
Attenuation (Max.)	300 MHz: 2.75 dB/100ft
Attenuation (Max.)	325 MHz: 2.92 dB/100ft
Attenuation (Max.)	350 MHz: 3.08 dB/100ft
Attenuation (Max.)	400 MHz: 3.34 dB/100ft
Attenuation (Max.)	450 MHz: 3.64 dB/100ft
Attenuation (Max.)	500 MHz: 3.92 dB/100ft
Attenuation (Max.)	550 MHz: 4.19 dB/100ft
Attenuation (Max.)	600 MHz: 4.48 dB/100ft
Attenuation (Max.)	750 MHz: 5.31 dB/100ft
Attenuation (Max.)	870 MHz: 5.86 dB/100ft
Attenuation (Max.)	1000 MHz: 6.53 dB/100ft

Environmental & Mechanical Ratings

Operating temperature	-20°C to +150°C
UL temperature	150°C
Installation min. bend radius	3.7 in (94 mm)
Max. pull tension	308 lbs (140 kg)
Bulk cable weight	63 lbs/1000ft
Environmental suitability	Indoor - Plenum, Indoor, Aerial - Black only, When supported by messenger Wire

Compliance & Certifications

Fire rating	CMP
Flammability / reaction to fire	NFPA 262
CEC / C(UL) compliance	CMP
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
Sustainability	CA Prop 65
Non-Plenum number	1617A, 7999A

Applications

• Use it for broadband distribution where consistent coax performance is required.
• Support Cable Television (CATV) signal distribution in plenum spaces.
• Run RF drop cable for RF distribution.
• Connect Direct Broadcast Satellite (DBS) within RF distribution systems.
• Route RF signals from Over-The-Air (OTA) antennas.

Belden™ and all associated trademarks are the property of their respective owners.