Belden 5302F1 010, Multi Conductor 4C 18 AWG PVC FS PVC Black

Belden 5302F1 010 is a security & sound cable rated-CMG-FPL-PLTC with 4 conductors in 18 AWG stranded tinned copper and PVC insulation. It includes waterblock tape and a tape shield with 100% coverage, plus an overall drain wire to support noise rejection. The PVC jacket supports a 300 V (CMG, FPL, PLTC-ER) rating and a UL temperature of 90°C for use in specified indoor, outdoor, and below-grade conduit environments.

Key Features

• Rated-CMG-FPL-PLTC security & sound cable with UL voltage rating: 300 V (CMG, FPL, PLTC-ER).
• 4 conductors, 18 AWG, with conductor stranding: 7x26 and conductor material: TC - Tinned Copper.
• PVC - Polyvinyl Chloride insulation with color code: Black, White, Red, Green.
• Tape shield with shield coverage: 100% and drainwire type: 20 AWG (7x28) TC.
• Waterblocking: Waterblock Tape for moisture-focused installations.
• PVC - Polyvinyl Chloride jacket with overall cable diameter (nominal): 0.259 in (6.58 mm).

Technical Specs

Electrical & Physical Specs

Insulation thickness (nom.)	0.010 in (0.25 mm)
Insulation diameter (nom.)	0.066 in (1.7 mm)
Shield material	Bi-Laminate (Alum+Poly)
Jacket thickness (nom.)	0.037 in (0.94 mm)
Nom. diameter	0.259 in (6.58 mm)
Bulk cable weight	45 lbs/1000ft (67 kg/km)

Performance & Electrical Characteristics

Nom. conductor DCR	6.6 Ohm/1000ft (22 Ohm/km)
Nom. capacitance cond-to-cond	40 pF/ft (130 pF/m)
Nom. outer shield DCR	15.25 Ohm/1000ft (50.03 Ohm/km)

Environmental & Mechanical Ratings

UL temperature	90°C
Operating temperature	-20°C to +90°C
Stationary min. bend radius	2.6 in (66 mm)
Installation min. bend radius	2.6 in (66 mm)
Max. pull tension	102 lbs (46.3 kg)
Environmental suitability	Water Exposure/Below-Grade Conduit, Indoor, Outdoor, Sunlight Resistance, Burial
Flammability / reaction to fire	UL 1685 FT4 Loading, FT4, IEEE 1202

Compliance & Certifications

CPR compliance	CPR Euroclass: Eca
NEC / UL compliance	Article 725, Article 760, Article 800, CMG, FPL, PLTC
CEC / C(UL) compliance	CMG
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)

Applications

• Use for security system wiring where a rated-CMG-FPL-PLTC cable is required.
• For intercom/PA installations, the shielded construction supports noise rejection.
• Choose for audio/speaker runs where consistent electrical characteristics are needed.
• Apply in power-limited controls covered under the listed NEC / UL compliance articles.
• In noisy & wet location environments, water exposure and shielding are key considerations.
• For below-grade duct and below-grade conduit scenarios, burial and water exposure suitability are specified.

Belden™ and all associated trademarks are the property of their respective owners.