Belden 7808R 010 Type RG-8X RF240 Coaxial 50OHM PVC Noir
Description
Belden 7808R 010 est un câble coaxial 50 Ohm de type RG-8X, RF 240, destiné à la transmission sans fil, avec une gaine noire en PVC. Il est répertorié comme un câble coaxial de transmission sans fil 50 Ohm et inclut la classification CMR.
Spécifications techniques
| Impédance | 50 Ohm |
|---|---|
| Type | RF 240 |
| Type de coaxial | RG58X |
| Conducteur | Conducteur massif 15 AWG en cuivre nu |
| Isolation | Isolation en PE |
| Blindage | Duofoil® II + tresse en cuivre étamé 95% Blindage |
| Gaine | Gaine en PVC |
| Classification | CMR |
Applications
- Utilisation dans les installations coaxiales de transmission sans fil nécessitant un câble 50 Ohm.
- Réalisation de câblages RF spécifiant un coaxial de type RF 240 / RG58X.
Spécifications
| Attribute | Value |
|---|---|
| Coax construction | Coaxial |
| Coax Type | Coaxial |
| RG type | 58X |
| Wireless transmission coax | RF 240 |
| Number of coax | 1 |
| Number of Conductors | 1 |
| Outer jacket material | PVC - Polyvinyl Chloride |
| Flooded | No not flooded over braid |
| Shield Type | Both, braid over foil |
| Tape shield (Layer 1) | Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100% |
| Braid shield (Layer 2) | Tinned Copper (TC), 95% |
| Conductor nominal diameter | 0.057 in |
| Insulation nominal diameter | 0.150 in |
| Outer jacket nominal diameter | 0.240 in |
| Bulk cable weight | 40 lbs/1000ft |
| Nom. capacitance (Conductor to Shield) | 23 pF/ft |
| Nominal inductance | 0.06 µH/ft |
| Nominal delay | 1.18 ns/ft |
| Nominal velocity of propagation (VP) [%] | 86% |
| Nominal conductor DCR | 3.2 Ohm/1000ft |
| Nominal outer shield DCR | 2.8 Ohm/1000ft |
| Outer conductor DCR | 2.8 Ohm/1000ft |
| Max. VSWR | 5-6000 MHz, 1.25:1 |
| High frequency performance (Nominal/Typical) | 5 MHz: 0.58 dB/100ft; 10 MHz: 0.77 dB/100ft; 30 MHz: 1.3 dB/100ft; 50 MHz: 1.6 dB/100ft; 150 MHz: 2.8 dB/100ft; 220 MHz: 3.4 dB/100ft; 450 MHz: 4.9 dB/100ft; 900 MHz: 7.0 dB/100ft; 1500 MHz: 9.1 dB/100ft; 1800 MHz: 10.1 dB/100ft; 2000 MHz: 10.7 dB/100ft; 2500 MHz: 12 dB/100ft; 3000 MHz: 13.4 dB/100ft; 3500 MHz: 14.6 dB/100ft; 4500 MHz: 16.7 dB/100ft; 5800 MHz: 19.5 dB/100ft; 6000 MHz: 19.8 dB/100ft |
| Power rating | 30 MHz: 1,526 W; 50 MHz: 1,186 W; 150 MHz: 673 W; 220 MHz: 556 W; 450 MHz: 382 W; 900 MHz: 268 W; 1,500 MHz: 205 W; 2,000 MHz: 177 W; 2,500 MHz: 156 W; 3,500 MHz: 100 W; 4,500 MHz: 116 W; 6,000 MHz: 100 W |
| UL Temperature Rating | 60°C |
| Operating Temperature Range | -20°C to +75°C |
| Maximum recommended pulling tension | 69 lbs |
| Minimum minor axis bend radius | 2.4 in |
| Plenum (Y/N) | No |
| Environmental space | Indoor/Outdoor |
| Suitability - indoor | Yes |
| Suitability - Outdoor | Yes - Black only |
| Suitability - aerial | Yes - Black only, when supported by messenger Wire |
| Suitability - burial | No |
| Suitability - hazardous locations | No |
| UL Voltage Rating | 300 V RMS |
| CEC / C(UL) compliance | CMG |
| CPR Euroclass | Eca |
| UL flammability | UL1666 Vertical Shaft |
| IEC flammability | IEC 60332-1-2 |
| EU Directive 2000/53/EC (ELV) | Yes |
| EU Directive 2003/11/EC (BFR) | Yes |
| EU Directive 2003/96/EC (BFR) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU directive compliance | EU Directive 2003/11/EC (BFR) |
| MII Order #39 (China RoHS) | Yes |
| Footnote | C - CRATE REEL PUT-UP. |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 7808R 010100, 7808R 010250, 7808R 010500, 7808R 0101000, UPC 612825189695 |
| Priced Per | FT |
Documents
Les images sont fournies à titre indicatif uniquement. Les spécifications peuvent changer sans préavis — vérifiez l'adéquation à votre application avant l'achat. La documentation du fabricant fait foi.
Besoin d'une coupe sur mesure, d'un prix de gros ou d'une fiche technique ?
Notre équipe établit des devis pour les longueurs personnalisées et les commandes en gros, généralement le jour même.