Belden 8522 009 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is a 1-conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation in a medium wall construction. This wire is rated 1000 V RMS and 80°C, with a max. current of Single Conductor in free air @ 30ºC: 16 A. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
Belden 8522 009 Key Features
- It features a 1 conductor 18 AWG (16x30) TC - Tinned Copper construction for low temp plastic lead wire builds.
- PVC - Polyvinyl Chloride insulation is provided in a medium wall construction.
- It is rated 1000 V RMS and 80°C for electrical and electronic wiring needs.
- The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
Belden 8522 009 Technical Specs
Construction & Materials
| Number of conductors | 1 |
|---|
| Conductor size | 18 AWG |
|---|
| Stranding | 16x30 |
|---|
| Conductor material | TC - Tinned Copper |
|---|
| Insulation material | PVC - Polyvinyl Chloride |
|---|
| Insulation color | White |
|---|
| Shielding | Not Shielded |
|---|
| Type | TYPE MW MIL-W-76C-PVC |
|---|
Dimensions & Weight
| Nom. thickness | 0.017 in (0.43 mm) |
|---|
| Nom. insulation diameter | 0.08 in (2.0 mm) |
|---|
| Overall cable diameter (nominal) | 0.08 in (2.0 mm) |
|---|
| Bulk cable weight | 7 lbs/1000ft |
|---|
Electrical Characteristics
| Nom. conductor DCR | 6.5 Ohm/1000ft |
|---|
| Max. current | Single Conductor in free air @ 30ºC: 16 A |
|---|
Environmental & Mechanical Ratings
| Operating temperature | -40°C To +80°C |
|---|
| Stationary min. bend radius | 0.8 in (20 mm) |
|---|
| Installation min. bend radius | 0.8 in (20 mm) |
|---|
| Max. pull tension | 19 lbs (8.6 kg) |
|---|
| Environmental suitability | Outdoor |
|---|
Compliance & Certifications
| Military compliance | MIL-W-76C Type MWP |
|---|
| Sustainability | CA Prop 65 |
|---|
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
|---|
| APAC compliance | China RoHS II (GB/T 26572-2011) |
|---|
| RoHS compliant | Yes |
|---|
Applications
- It is designed for inter-connection circuits where a low temp plastic lead wire is required.
- For equipment builds and assemblies, it supports internal wiring of computer and electronic equipments.
- It is specified for (Type MW) MIL-W-76C-Low Temp applications.
- It is used for internal wiring of electrical and electronic equipment.
Belden™ and all associated trademarks are the property of their respective owners.
