Belden 8524 001 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is built with 1-Conductor 22 AWG (7x30) TC - Tinned Copper and PVC - Polyvinyl Chloride insulation in Brown. This wire is rated 1000 V RMS and 80°C, with a max. current of Single Conductor in free air @ 30ºC: 9.0 A. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
Belden 8524 001 Key Features
- 1-Conductor 22 AWG (7x30) TC - Tinned Copper construction supports inter-connection circuits and internal wiring.
- PVC - Polyvinyl Chloride insulation in Brown.
- UL Voltage Rating: 1000 V RMS.
- UL temperature: 80°C.
- Max. current: Single Conductor in free air @ 30ºC: 9.0 A.
- Extruded PVC insulation is flame and ozone resistant.
- It is inert to most chemicals, oils, and solvents.
- Shielded: Not Shielded.
Belden 8524 001 Technical Specs
Construction & Materials
| Number of conductors | 1 |
|---|
| Conductor size | 22 AWG |
|---|
| Stranding | 7x30 |
|---|
| Material | TC - Tinned Copper |
|---|
| Insulation material | PVC - Polyvinyl Chloride |
|---|
| Type | MW |
|---|
| Product type | MW-76 |
|---|
Dimensions & Weight
| Nom. thickness | 0.017 in (0.43 mm) |
|---|
| Nom. insulation diameter | 0.064 in (1.6 mm) |
|---|
| Overall cable diameter (nominal) | 0.064 in (1.6 mm) |
|---|
| Bulk cable weight | 4 lbs/1000ft |
|---|
Electrical Characteristics
| Nom. conductor DCR | 16 Ohm/1000ft |
|---|
Environmental & Mechanical Ratings
| Operating | -40°C To +80°C |
|---|
| Bend radius (stationary min.) | 0.64 in (16 mm) |
|---|
| Bend radius (installation min.) | 0.64 in (16 mm) |
|---|
| Max. pull tension | 11 lbs (5.0 kg) |
|---|
| Environmental suitability | Outdoor |
|---|
Compliance & Certifications
| Military compliance | MIL-W-76C Type MWP |
|---|
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
|---|
| Sustainability | CA Prop 65 |
|---|
| RoHS compliant | Yes |
|---|
Belden 8524 001 Applications
- Use it for inter-connection circuits that require a low temp plastic lead wire for point-to-point wiring.
- For internal wiring of computer and electronic equipments, it helps connect components and assemblies within equipment.
- It is suitable for (Type MW) MIL-W-76C-Low Temp applications where Type: MW and Product type: MW-76 are required.
Belden™ and all associated trademarks are the property of their respective owners.
