Belden 9985 002, Hook Up Wire 1C 26 AWG Tinned Copper PVC

Belden 9985 002 is a low temp plastic lead wire for dependable internal wiring and inter-connection circuits in computer and electronic equipment. It is a 1-conductor 26 AWG (7x34) tinned copper wire with PVC insulation and a red insulation color for flexible, space-saving routing. This hook up wire is rated AWM 1061 and CSA AWM 300V 80C, with a UL Voltage Rating of 300 V RMS. It is suitable for indoor use and meets VW-1 flammability requirements.

Belden 9985 002 Technical Specs

Construction & Materials

Wire type	Low temp plastic lead wire
Number of conductors	1
Conductor size	26 AWG
Conductor stranding	7x34
Conductor material	TC - Tinned Copper
Insulation material	PVC - Polyvinyl Chloride
Insulation color	Red
Shielding	Not shielded

Dimensions & Weight

Nom. insulation thickness	0.01 in (0.25 mm)
Nom. insulation diameter	0.039 in (0.99 mm)
Overall cable diameter (nominal)	0.039 in (0.99 mm)
Bulk cable weight	1 lbs/1000ft

Electrical & Performance Characteristics

UL voltage rating	300 V RMS
Nom. conductor DCR	45.8 Ohm/1000ft
Max. current	Single conductor in free air @ 30ºC: 5 A
Nom. insertion loss (attenuation)	6.6 dB/100m
Typical unbalanced FEXT %	6.6 MHz

Environmental & Mechanical Ratings

UL temperature	105°C
Operating temperature	-25°C To +105°C
Bend radius (stationary min.)	0.39 in (9.9 mm)
Bend radius (installation min.)	0.39 in (9.9 mm)
Max. pull tension	4 lbs (1.8 kg)
Environmental suitability	Indoor
Flammability / reaction to fire	VW-1

Compliance & Certifications

AWM compliance	AWM 1061, AWM I A/B
CEC / C(UL) compliance	LL7874
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
Sustainability	CA Prop 65
RoHS compliant	Yes

Belden 9985 002 Applications

• Supports inter-connection circuits that require reliable point-to-point wiring inside equipment.
• Used for internal wiring of computer and electronic equipment in indoor environments.

Belden™ and all associated trademarks are the property of their respective owners.