Belden 1523A 010, Coax CATV Cable 14 AWG SH PVC Black

Belden 1523A 010 is a Series 11 broadband coax cable (RG 11) with a 14 AWG solid BCCS - Bare Copper Covered Steel conductor, PE - Polyethylene (Foam) insulation, and a PVC - Polyvinyl Chloride jacket in Black. It features a dual-layer shield using Duobond® II tri-laminate tape (100%) plus a 60% aluminum braid. Electrical characteristics include 75 Ohm characteristic impedance, 83% velocity of propagation, and 20 dB minimum structural return loss from 5 - 1000 MHz. It is UL rated 300 V (CM), (CM) and has a UL temperature of 75°C with an operating range of -40°C to +75°C.

Belden 1523A 010 Key Features

• Series 11 broadband coax cable (RG 11) with coaxial construction.
• 14 AWG solid BCCS - Bare Copper Covered Steel conductor.
• PE - Polyethylene (Foam) insulation with White color code.
• Dual-layer shield: Duobond® II tri-laminate tape (100%) plus 60% aluminum braid.
• PVC - Polyvinyl Chloride jacket in Black.
• 75 Ohm characteristic impedance and 83% velocity of propagation.
• Return loss (min. structural): 20 dB (5 - 1000 MHz).
• UL voltage rating: 300 V (CM), (CM).
• UL temperature: 75°C; operating: -40°C to +75°C.

Belden 1523A 010 Technical Specs

Electrical & Physical Specs

Overall Cable Diameter (nominal)	0.393 in (9.98 mm)
Conductor Nom. Diameter	0.064 in
Nom. Insulation Diameter	0.280 in (7.11 mm)
Jacket Nom. Diameter	0.393 in (9.98 mm)
Nom. capacitance Cond-to-Shield	16.3 pF/ft (53.5 pF/m)
Nom. Conductor DCR	11 Ohm/1000ft (36 Ohm/km)
Nom. outer Shield DCR	4.1 Ohm/1000ft (13 Ohm/km)
Bulk Cable Weight	199

Performance (Attenuation Max.)

Attenuation (Max.) 5 MHz	0.38 dB/100ft
Attenuation (Max.) 55 MHz	0.96 dB/100ft
Attenuation (Max.) 211 MHz	1.90 dB/100ft
Attenuation (Max.) 250 MHz	2.05 dB/100ft
Attenuation (Max.) 270 MHz	2.13 dB/100ft
Attenuation (Max.) 300 MHz	2.25 dB/100ft
Attenuation (Max.) 330 MHz	2.35 dB/100ft
Attenuation (Max.) 350 MHz	2.42 dB/100ft
Attenuation (Max.) 400 MHz	2.60 dB/100ft
Attenuation (Max.) 450 MHz	2.75 dB/100ft
Attenuation (Max.) 500 MHz	2.90 dB/100ft
Attenuation (Max.) 550 MHz	3.04 dB/100ft
Attenuation (Max.) 600 MHz	3.18 dB/100ft
Attenuation (Max.) 750 MHz	3.65 dB/100ft
Attenuation (Max.) 870 MHz	4.06 dB/100ft
Attenuation (Max.) 1000 MHz	4.35 dB/100ft

Environmental & Mechanical Ratings

Bend Radius (stationary min.)	3.9 in (99 mm)
Bend Radius (installation min.)	3.9 in (99 mm)
Max. pull tension	199 lbs (90.3 kg)
Environmental suitability	Indoor (Not Riser or Plenum), Indoor, Aerial - Black only, When supported by messenger Wire
Flammability / reaction to fire	UL1685 UL Loading, FT4
CPR compliance	CPR Euroclass: Eca
Plenum number	1523AP

Compliance & Certifications

NEC / UL compliance	Article 800, CM, CATV
CEC / C(UL) compliance	CM
Other standard compliance(s)	ANSI/SCTE 74
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)
Sustainability	CA Prop 65

Belden 1523A 010 Applications

• Supports broadband signal distribution where Series 11 coax is specified.
• Use it for Cable Television (CATV) connections and distribution runs.
• It works well for RF drop cable runs in typical RF distribution layouts.
• Choose it for Over-The-Air (OTA) antenna connections.

Belden™ and all associated trademarks are the property of their respective owners.