Belden 28141A, Control Cable 5C 10 AWG PVC NYL 600V

Belden 28141A is a VNTC control cable designed for power and control applications up to 600V, including Class 1 Division 2 hazardous locations. It is built with 5 stranded 10 AWG (7x18) BC - Bare Copper conductors with PVC/Nylon - Polyvinyl Chloride + Nylon insulation and a black PVC - Polyvinyl Chloride outer jacket. This unshielded cable includes a ripcord and is rated 90°C Dry, 90°C Wet with TC-ER marking. It is listed for indoor and outdoor use with sunlight resistance, UV resistance, and burial suitability.

Belden 28141A Key Features

• Supports power and control applications up to 600V, including Class 1 Division 2 hazardous locations.
• Built with 5 stranded 10 AWG (7x18) BC - Bare Copper conductors for control and power wiring needs.
• Uses PVC/Nylon - Polyvinyl Chloride + Nylon insulation with an E2 color code (Black, Red, Blue, Orange, Yellow) for identification.
• Unshielded construction (No Shield) with a black PVC - Polyvinyl Chloride outer jacket.
• Rated 90°C Dry, 90°C Wet and marked TC-ER.
• Includes a ripcord for easier jacket removal during installation.
• Environmental suitability includes indoor, outdoor, sunlight resistance, UV resistance, and burial.

Belden 28141A Technical Specs

Electrical & Performance Characteristics

Nom. conductor DCR	1.06 Ohm/1000ft
Max. current	32 Amps per Conductor at 30ºC

Construction & Physical Specs

UL type	TC (1277) PVC-Nylon/PVC
Product type	VNTC control
Earth/ground wires	No
Nom. thickness (insulation)	0.024 in (0.61 mm)
Nom. insulation diameter	0.164 in (4.17 mm)
Nom. thickness (jacket)	0.063 in (1.6 mm)
Nom. diameter (jacket)	0.569 in (14.5 mm)
Overall cable diameter (nominal)	0.569 in (14.5 mm)
Armor	No
Composite	No
Bulk cable weight	257 lbs/1000ft

Environmental & Mechanical Ratings

Operating temperature	Wet/Dry: -30°C to 90°C
Bend radius (stationary min.)	2.276 in (57.81 mm)
Bend radius (installation min.)	2.845 in (72.26 mm)
Max. pull tension	740 lbs (340 kg)
Flammability / reaction to fire	UL 1685 UL Loading, IEEE 1202 FT4
Marking	600V TC-ER 90C Dry/Wet SUN RES DIR BUR

Compliance & Certifications

NEC / UL compliance	Article 336, Article 310, TC-ER, THWN-2
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)

Belden 28141A Applications

• Use it for power and control applications up to 600V.
• Install it in Class 1 Division 2 hazardous locations.
• Recommended cable gland: Belden BTC075A0791RA.

Belden™ and all associated trademarks are the property of their respective owners.