Belden 5584G1 008, Multi Conductor 1 FS PR 2 Pair 22 AWG PVC Gray

Belden 5584G1 008 is a rated-CM security & sound cable with 22 AWG solid tinned copper conductors, PVC insulation, and a PVC jacket. It includes 1 pair protected by a Beldfoil® tape shield and drain wire, along with 2 additional unshielded pairs. Inner and overall waterblocking tape and a 300 V rating support use in security systems, intercom/PA, audio/speaker, and power-limited control circuits, including noisy & wet locations and below-grade duct installations.

Key Features

• Rated-CM security & sound cable for security systems, intercom/PA, audio/speaker, and power-limited control circuits.
• 22 AWG solid tinned copper conductors with PVC insulation.
• 1 pair with Beldfoil® tape shield and drain wire, plus 2 additional unshielded pairs.
• Inner and overall waterblocking tape for noisy & wet locations and below-grade duct installations.
• PVC jacket with UL voltage rating: 300 V.

Technical Specs

Construction & Materials

Conductor material	TC - Tinned Copper
Conductor size	22 AWG
Conductor type	Solid
Pairs	1 x 22 AWG (Solid) TC - Tinned Copper
Pairs	2 x 22 AWG (Solid) TC - Tinned Copper
Insulation material	PVC - Polyvinyl Chloride
Nom. insulation thickness	0.01 in (0.25 mm)
Nom. insulation diameter	0.046 in (1.2 mm)
Color code (pair)	Black & Red
Color code (pairs)	Black & White, Black & Green
Inner shield (Blk/Red pair)	Tape
Inner shield material	Bi-Laminate (Alum+Poly)
Shield coverage	100%
Drainwire type	20 AWG (Solid) TC
Outer shield	No Shield
Jacket material	PVC - Polyvinyl Chloride
Separator	Waterblocking Tape
Ripcord	Yes

Dimensions & Physical Specs

Nom. jacket thickness	0.025 in (0.64 mm)
Overall cable diameter (nominal)	0.283 in
Bulk cable weight	31.7 lbs/1000ft

Environmental & Mechanical Ratings

UL temperature	105°C
Operating	-20°C To +105°C
Bend radius (stationary min.)	2.83 in (71.9 mm)
Bend radius (installation min.)	2.83 in
Max. pull tension	59 lbs (27 kg)
Environmental suitability	Indoor

Performance & Electrical Characteristics

Nom. conductor DCR (pair)	20.6 Ohm/1000ft
Nom. capacitance cond-to-cond (pair)	33 pF/ft (110 pF/m)
Nom. capacitance cond-to-other (Conds + Shield) (pair)	58.6 pF/ft (192 pF/m)
Max. current	3.2 Amps per Conductor at 25ºC
Nom. conductor DCR (pair)	20.6 Ohm/1000ft (67.6 Ohm/km)
Nom. capacitance cond-to-cond (pair)	18 pF/ft (59 pF/m)

Compliance & Certifications

Flammability / reaction to fire	UL 1685 UL Loading, IEEE 1202 FT4
NEC / UL compliance	Article 800, CM
CEC / C(UL) compliance	CM
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)

Applications

• Use in security system installations where a rated-CM security & sound cable is required.
• Run intercom/PA wiring in indoor environments.
• Support audio/speaker connections that benefit from a shielded pair and additional unshielded pairs in one cable.
• Install in power-limited controls circuits for indoor applications.
• Route through noisy & wet locations where waterblocking tape is desired.
• Specify for below-grade duct installations where waterblocking tape is required.

Belden™ and all associated trademarks are the property of their respective owners.