Belden 8219 009, Coax RG 58A U White

Belden 8219 009 is an RG type: 58 coaxial cable built with a 20 AWG (19x32) tinned copper stranded conductor, PE - Polyethylene (Foam) insulation, and a white PVC - Polyvinyl Chloride jacket. It uses a 95% coverage tinned copper (TC) braid shield and is listed with NEC / UL compliance: CM and CEC / C(UL) compliance: CM. Electrical performance includes Nom. characteristic impedance: 54 Ohm, Nom. velocity of prop.: 76%, and UL Voltage Rating: 300 V (CM), 30 V (UL AWM 1354). Environmental suitability is listed as Outdoor - Aerial, Indoor, Outdoor, UV Resistance, Aerial - When supported by messenger Wire.

Key Features

• RG type: 58 coaxial construction with a 20 AWG (19x32) tinned copper stranded conductor.
• 95% coverage tinned copper (TC) braid shield for consistent shielding effectiveness.
• White PVC - Polyvinyl Chloride jacket with NEC / UL compliance: CM and CEC / C(UL) compliance: CM.
• UL Voltage Rating: 300 V (CM), 30 V (UL AWM 1354).
• Environmental suitability: Outdoor - Aerial, Indoor, Outdoor, UV Resistance, Aerial - When supported by messenger Wire.

Technical Specs

Construction & Physical Specs

Cable type	Coaxial
Conductor	20 AWG (19x32) Tinned Copper
Nom. conductor diameter	0.037 in
Insulation material	PE - Polyethylene (Foam)
Nom. insulation diameter	0.116 in (2.95 mm)
Outer shield	Braid, Tinned Copper (TC), 95% coverage
Jacket material	PVC - Polyvinyl Chloride
Jacket color code	White
Overall cable diameter (nominal)	0.193 in (4.90 mm)
Flooded	No not flooded over braid
Bulk cable weight	26 lbs/1000ft

Electrical Characteristics & Performance

Nom. characteristic impedance	54 Ohm
Nom. capacitance Cond-to-Shield	26.0 pF/ft (85.3 pF/m)
Nom. velocity of prop.	76%
Nom. conductor DCR	8.8 Ohm/1000ft
Nom. outer shield DCR	4.1 Ohm/1000ft (13 Ohm/km)
Attenuation (nominal) 1 MHz	0.4 dB/100ft
Attenuation (nominal) 10 MHz	1.3 dB/100ft
Attenuation (nominal) 50 MHz	3.1 dB/100ft
Attenuation (nominal) 100 MHz	4.5 dB/100ft
Attenuation (nominal) 200 MHz	6.6 dB/100ft
Attenuation (nominal) 400 MHz	10.0 dB/100ft
Attenuation (nominal) 700 MHz	14.2 dB/100ft
Attenuation (nominal) 900 MHz	16.6 dB/100ft
Attenuation (nominal) 1000 MHz	18.1 dB/100ft

Environmental & Mechanical Ratings

UL temperature	80°C
Operating temperature	-40°C to +80°C
Installation min. bend radius	1.9 in (48 mm)
Max. pull tension	50 lbs (23 kg)

Compliance & Certifications

AWM compliance	AWM 1354
Flammability / reaction to fire	UL1685 UL Loading, UN ECE R118.02
Sustainability	CA Prop 65
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
Other standard compliance(s)	P-MSHA-SC-182/5

Applications

• Supports point-to-point and point-to-multipoint wireless antenna communication links.
• Works well in wireless microphones where RF signal transmission is required.
• Integrates into two-way radio setups that rely on coaxial RF interconnects.
• Commonly used in Amateur (Ham) Radio installations.
• Suitable for Low Power FM signal connections.
• Handles GPS signal cabling runs.
• Provides RF connectivity in RFID (Radio Frequency Identification) systems.

Belden™ and all associated trademarks are the property of their respective owners.