Belden 8503 002, Hook Up Wire 1C 22 AWG Tinned Copper PVC

Belden 8503 002 is a low temp plastic lead wire for inter-connection circuits and internal wiring in computer and electronic equipment. It is a 1-conductor 22 AWG (7x30) wire with a TC - Tinned Copper conductor and PVC - Polyvinyl Chloride insulation in red. This Type B MIL-W-16878/1 wire is rated 600 V RMS and specified for 105°C, with an operating temperature range of -40°C to +105°C. The nominal 0.050 in (1.3 mm) overall diameter supports compact routing in panels, meters, and equipment wiring.

Belden 8503 002 Key Features

• 1-conductor 22 AWG (7x30) construction for internal wiring and inter-connection circuits.
• TC - Tinned Copper conductor with PVC - Polyvinyl Chloride insulation in red.
• 600 V RMS voltage rating.
• 105°C temperature rating with an operating temperature range of -40°C to +105°C.
• Type B MIL-W-16878/1 construction for M16878 product type requirements.

Belden 8503 002 Technical Specs

Electrical & Physical Specs

Nom. Insulation Thickness	0.01 in (0.25 mm)
Nom. Insulation Diameter	0.05 in (1.3 mm)
Overall Cable Diameter (nominal)	0.050 in (1.3 mm)
Shielding	Not Shielded
Bulk Cable Weight	3 lbs/1000ft

Performance & Electrical Characteristics

Nom. Conductor DCR	16.2 Ohm/1000ft
Max. current	Single Conductor in free air @ 30ºC: 11.0 A

Environmental & Mechanical Ratings

Stationary min. Bend Radius	0.50 in (13 mm)
Installation min. Bend Radius	0.50 in (13 mm)
Max. pull tension	8 lbs (3.6 kg)
Environmental suitability	Outdoor
Sustainability	CA Prop 65

Compliance & Certifications

European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
RoHS compliant	Yes

Belden 8503 002 Applications

• Supports inter-connection circuits where reliable point-to-point wiring is needed inside equipment.
• Used for internal wiring of computer and electronic equipment.
• Meets Type B MIL-W-16878/1 low temp application requirements.
• Works well for internal wiring of meters, panels, and electrical or electronic equipment.

Belden™ and all associated trademarks are the property of their respective owners.