Belden 28335AS 010, Control Cable 5C 18 AWG Foil Shield PVC NYL 600V, Black Jacket

Belden 28335AS 010 is a 5-conductor 18 AWG VNTC control cable for power and control applications up to 600V. It features stranded bare copper conductors with PVC-NYL insulation and an overall Beldfoil® shield to help reduce electrical noise. The black PVC outer jacket includes a ripcord, and the cable is rated 90°C dry, 90°C wet with suitability for indoor, outdoor, sunlight resistance, and burial installations. It is built to UL Type TC (1277) and carries UL Voltage Rating: 600 V (TC-ER), 150 V (NPLF).

Belden 28335AS 010 Key Features

• 5-conductor 18 AWG VNTC control cable for power and control applications up to 600V.
• Stranded bare copper conductors with stranding 7x26.
• PVC/Nylon - Polyvinyl Chloride + Nylon insulation with color code: Black, Red, Blue, Orange, Yellow.
• Overall Beldfoil® shield (tape) with 100% coverage; Shield Material: Bi-Laminate (Alum+Poly); Shield Type: Foil Shield AL MYLAR.
• Black PVC - Polyvinyl Chloride outer jacket with ripcord: Yes.
• UL temperature: 90°C dry, 90°C wet; Operating: Wet/Dry: -30°C to 90°C.
• Environmental suitability: Indoor, Outdoor, Sunlight Resistance, Burial.
• UL Voltage Rating: 600 V (TC-ER), 150 V (NPLF); Voltage range: 600V.
• Flammability / reaction to fire: UL1685 UL Loading, IEEE 1202 FT4.
• NEC / UL compliance: Article 336, Article 400, Article 760, TC-ER, NPLF, TFFN.
• European directive compliance: EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE).

Belden 28335AS 010 Technical Specs

Construction & Materials

Product type	VNTC Control
Armor	No
Composite	No
Earth/ground wires	No
UL type	UL Type TC (1277) PVC-Nylon/PVC
Drainwire type	18 AWG (7x26) TC

Dimensions & Weight

Nom. thickness (insulation)	0.020 in (0.51 mm)
Nom. insulation diameter	0.087 in (2.2 mm)
Nom. jacket thickness	0.047 in (1.2 mm)
Nom. diameter	0.333 in
Overall cable diameter (nominal)	0.333 in
Bulk cable weight	73 lbs/1000ft

Electrical Characteristics

Nom. conductor DCR	6.7 Ohm/1000ft
Max. current	11.2 Amps per Conductor at 30ºC
Nom outer shield DCR	4.83 Ohm/1000ft (15.8 Ohm/km)

Mechanical Ratings

Bend radius (stationary min.)	3.996 in (101.5 mm)
Bend radius (installation min.)	3.996 in
Max. pull tension	130 lbs (59 kg)

Belden 28335AS 010 Applications

• Use it for power and control applications up to 600V.
• Choose it for installations where an overall shield is needed to help reduce electrical noise.
• Install it in indoor or outdoor runs, including locations requiring sunlight resistance.
• Select it for burial environments where the listed environmental suitability is required.

Belden™ and all associated trademarks are the property of their respective owners.