Belden 735A1 008, Coax 26 AWG PVC Gray

Belden 735A1 008 is a 75 Ohm coax cable with a 26 AWG solid 0.016 in SCCS - Silvered Copper Covered Steel center conductor and PE - Polyethylene (Foam) insulation. It features dual-layer shielding with Beldfoil® tape and a Tinned Copper braid, and a PVC - Polyvinyl Chloride jacket in Gray. Designed for indoor - riser installations, it meets NEC/(UL) Compliance: CMR and CEC/C(UL) Compliance: CMG and has a UL Voltage Rating of 300 V RMS.

Belden 735A1 008 Key Features

• 75 Ohm nominal characteristic impedance for coax signal transmission.
• 26 AWG solid 0.016 in SCCS - Silvered Copper Covered Steel center conductor.
• PE - Polyethylene (Foam) insulation with 0.077 in nominal diameter.
• Dual-layer shielding: Beldfoil® tape (100% coverage) plus Tinned Copper (TC) braid (95% coverage).
• PVC - Polyvinyl Chloride jacket in Gray with 0.129 in nominal diameter.
• Environmental Space: indoor - riser.
• NEC/(UL) Compliance: CMR and CEC/C(UL) Compliance: CMG.
• UL Voltage Rating: 300 V RMS.

Belden 735A1 008 Technical Specs

Construction & Type

Type	735
RG Type	Mini 59
Number Of Conductors	1
No. of Coax	1

Electrical Characteristics

Nom. Capacitance Conductor to Shield	17.7 pF/ft
Nominal Inductance	0.19 μH/ft
Nominal Delay	1.34 ns/ft
Nominal Velocity of Propagation (VP) [%]	76%
Nominal Conductor DCR	41 Ohm/1000ft
Nominal Outer Shield DCR	5.3 Ohm/1000ft

Performance (Return Loss & Attenuation)

Return Loss Frequency [MHz]	15-90 dB
Minimum Return (RL)	30 dB
Max. Insertion Loss (Attenuation) @ 1 MHz	0.6 dB/100ft
Max. Insertion Loss (Attenuation) @ 1.024 MHz	0.61 dB/100ft
Max. Insertion Loss (Attenuation) @ 4.224 MHz	1.1 dB/100ft
Max. Insertion Loss (Attenuation) @ 5 MHz	1.2 dB/100ft
Max. Insertion Loss (Attenuation) @ 10 MHz	1.7 dB/100ft
Max. Insertion Loss (Attenuation) @ 17.184 MHz	2.2 dB/100ft
Max. Insertion Loss (Attenuation) @ 22.368 MHz	2.5 dB/100ft
Max. Insertion Loss (Attenuation) @ 25.92 MHz	2.7 dB/100ft
Max. Insertion Loss (Attenuation) @ 44.736 MHz	3.6 dB/100ft
Max. Insertion Loss (Attenuation) @ 50 MHz	3.8 dB/100ft
Max. Insertion Loss (Attenuation) @ 69.632 MHz	4.5 dB/100ft
Max. Insertion Loss (Attenuation) @ 77.76 MHz	4.8 dB/100ft
Max. Insertion Loss (Attenuation) @ 100 MHz	5.5 dB/100ft
Max. Insertion Loss (Attenuation) @ 200 MHz	7.8 dB/100ft

Environmental & Mechanical Ratings

Operating Temperature Range	-40°C To +75°C
Bulk Cable Weight	12 lbs/1000ft
Maximum Recommended Pulling Tension	25 lbs
Minimum Minor Axis Bend Radius	1.25 in
Suitability - Indoor	Yes
Plenum (Y/N)	No
Plenum Number	735A1P

Compliance & Certifications

CPR Euroclass	Eca
UL Flammability	UL1666 Vertical Shaft
CSA Flammability	FT4
IEC Flammability	IEC 60332-1-2
EU Directive 2000/53/EC (ELV)	Yes
EU Directive 2003/11/EC (BFR)	Yes
EU Directive 2011/65/EU (RoHS 2)	Yes
EU Directive 2012/19/EU (WEEE)	Yes
EU Directive 2015/863/EU (RoHS 2 amendment)	Yes
EU Directive Compliance	EU Directive 2003/11/EC (BFR)
EU CE Mark	Yes
MII Order #39 (China RoHS)	Yes

Belden 735A1 008 Applications

• Use in indoor - riser installations where consistent signal performance is required.
• Support indoor building cable runs that require NEC/(UL) Compliance: CMR and CEC/C(UL) Compliance: CMG.
• Choose for indoor use where shielding with Beldfoil® tape and a Tinned Copper braid is desired for noise rejection.

Belden™ and all associated trademarks are the property of their respective owners.