Belden 8522 003, Hook Up Wire 1C 18 AWG Tinned Copper PVC

Belden 8522 003 is a low temp plastic lead wire for inter-connection circuits and the internal wiring of computer and electronic equipments. It is a 1-Conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation and Orange insulation color. Belden 8522 003 is rated 1000 V RMS and 80°C, and supports 16 A for a Single Conductor in free air @ 30ºC. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.

Belden 8522 003 Key Features

• 1-Conductor 18 AWG (16x30) TC - Tinned Copper construction for inter-connection circuits and internal wiring.
• PVC - Polyvinyl Chloride insulation with Orange insulation color.
• Rated 1000 V RMS and 80°C for Type MW MIL-W-76C-Low Temp applications.
• Extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.

Technical Specs

Product Identification

Product type	MW-76
Military compliance	MIL-W-76C Type MWP
Shielded	Not Shielded

Electrical & Physical Specs

Nom. thickness	0.017 in (0.43 mm)
Nom. Insulation Diameter	0.08 in (2.0 mm)
Overall Cable Diameter (nominal)	0.08 in (2.0 mm)
Bulk Cable Weight	7 lbs/1000ft

Performance & Electrical Characteristics

Nom. Conductor DCR	6.5 Ohm/1000ft

Environmental & Mechanical Ratings

Operating	-40°C To +80°C
Bend Radius (stationary min.)	0.8 in (20 mm)
Bend Radius (installation min.)	0.8 in (20 mm)
Max. pull tension	19 lbs (8.6 kg)
Environmental suitability	Outdoor

Compliance & Certifications

European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
Sustainability	CA Prop 65
RoHS compliant	Yes

Belden 8522 003 Applications

• Use it for inter-connection circuits where a low temp plastic lead wire is needed for reliable point-to-point electrical connections.
• Choose it for the internal wiring of computer and electronic equipments where consistent conductor and insulation construction is required.
• Specify it for (Type MW) MIL-W-76C-Low Temp applications to align with the stated product type and military compliance.

Belden™ and all associated trademarks are the property of their respective owners.