Belden 8522 010, Hook Up Wire 1C 18 AWG Tinned Copper PVC

Belden 8522 010 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is a 1 conductor 18 AWG (16x30) TC - Tinned Copper wire with PVC - Polyvinyl Chloride insulation in black. This wire is rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL voltage rating of 1000 V RMS and a UL temperature of 80°C.

Belden 8522 010 Key Features

• 1 conductor 18 AWG (16x30) TC - Tinned Copper construction for compact internal wiring runs.
• PVC - Polyvinyl Chloride insulation in black with medium wall PVC insulation.
• Rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL voltage rating of 1000 V RMS.
• Extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.
• Shielded: Not Shielded.

Belden 8522 010 Technical Specs

Product Classification & Standards

Product type	MW-76
Military compliance	MIL-W-76C Type MWP
Mil spec	MIL-W-76

Physical Construction

Insulation thickness (nom.)	0.017 in (0.43 mm)
Insulation diameter (nom.)	0.08 in (2.0 mm)
Overall cable diameter (nominal)	0.08 in (2.0 mm)
Bulk cable weight	7 lbs/1000ft

Electrical Characteristics

Nom. conductor DCR	6.5 Ohm/1000ft
Max. current	Single Conductor in free air @ 30ºC: 16 A

Environmental & Mechanical Ratings

Operating temperature	-40°C To +80°C
Bend radius (stationary min.)	0.8 in (20 mm)
Bend radius (installation min.)	0.8 in (20 mm)
Max. pull tension	19 lbs (8.6 kg)
Environmental suitability	Outdoor

Compliance & Certifications

European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC compliance	China RoHS II (GB/T 26572-2011)
Sustainability	CA Prop 65
RoHS compliant	Yes

Belden 8522 010 Applications

• Use for inter-connection circuits where a single-conductor lead wire is needed for point-to-point connections.
• For internal wiring of computer and electronic equipments, it helps route power or signal connections within equipment.
• Meets (Type MW) MIL-W-76C-Low Temp applications where this standard is required.
• Suitable for internal wiring of electrical and electronic equipment using a PVC insulated hook-up wire.

Belden™ and all associated trademarks are the property of their respective owners.