Belden 8524 004, Hook Up Wire 1C 22 AWG Tinned Copper PVC

Belden 8524 004 is a low temp plastic lead wire for inter-connection circuits and internal wiring of computer and electronic equipments, including (Type MW) MIL-W-76C-Low Temp applications. It is built with 1 conductor of 22 AWG (7x30) TC - Tinned Copper and PVC - Polyvinyl Chloride insulation. This wire is rated TYPE MW MIL-W-76C-PVC 1000V 80C, with a UL Voltage Rating of 1000 V RMS and an Operating Temperature Range of -40°C to +80°C. The extruded PVC insulation is flame and ozone resistant and is inert to most chemicals, oils, and solvents.

Belden 8524 004 Key Features

• 1 conductor design with 22 AWG (7x30) TC - Tinned Copper for inter-connection circuits and internal wiring.
• PVC - Polyvinyl Chloride insulation is flame and ozone resistant and inert to most chemicals, oils, and solvents.
• Rated TYPE MW MIL-W-76C-PVC 1000V 80C with a UL Voltage Rating of 1000 V RMS.
• Operating Temperature Range of -40°C to +80°C.
• Compliance and directives listed: EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE); RoHS compliant: Yes; Sustainability: CA Prop 65.

Belden 8524 004 Technical Specs

Construction & Materials

Product type	MW-76
Number of conductors	1
Conductor size	22 AWG
Stranding	7x30
Conductor material	TC - Tinned Copper
Insulation material	PVC - Polyvinyl Chloride
Insulation color	Yellow
Shielding	Not Shielded

Dimensions & Weight

Nom. thickness	0.017 in (0.43 mm)
Nom. insulation diameter	0.064 in (1.6 mm)
Overall cable diameter (nominal)	0.064 in (1.6 mm)
Bulk cable weight	4 lbs/1000ft

Performance & Electrical Characteristics

Nom. conductor DCR	16 Ohm/1000ft
Max. current	Single Conductor in free air @ 30ºC: 9.0 A

Mechanical Ratings

Bend radius (stationary min.)	0.64 in (16 mm)
Bend radius (installation min.)	0.64 in (16 mm)
Max. pull tension	11 lbs (5.0 kg)

Environmental Suitability

Environmental suitability	Outdoor

Compliance & Certifications

Military compliance	MIL-W-76C Type MWP

Applications

• Supports inter-connection circuits that require a low temp plastic lead wire for internal electrical connections.
• Used for internal wiring of computer and electronic equipments in equipment builds and internal assemblies.
• Meets (Type MW) MIL-W-76C-Low Temp applications where this product type is required.

Belden™ and all associated trademarks are the property of their respective owners.