Belden 9201 010, RG 58 U Coax 20 AWG PE BRD PVC Black

Belden 9201 010 is an RG-58/U coaxial cable for 50 Ohm wireless transmission in point-to-point and point-to-multipoint antenna communication systems. It features a 1 x 20 AWG solid bare copper conductor with PE - Polyethylene insulation and an 80% bare copper braid shield. A PVC - Polyvinyl Chloride jacket and 0.193 in (4.90 mm) nominal overall diameter support flexible indoor installations.

Belden 9201 010 Key Features

• RG-58/U coaxial construction for wireless transmission in point-to-point and point-to-multipoint antenna communication systems.
• 1 x 20 AWG solid bare copper conductor with PE - Polyethylene insulation.
• 80% coverage bare copper braid shield.
• PVC - Polyvinyl Chloride jacket with 0.193 in (4.90 mm) nominal overall diameter for flexible indoor installations.

Belden 9201 010 Technical Specs

Construction & Materials

Coax type	RG-58/U
Conductor	1 x 20 AWG, solid, BC - Bare Copper
Nom. conductor diameter	0.033 in
Insulation material	PE - Polyethylene
Nom. insulation diameter	0.116 in (2.95 mm)
Insulation color code	White
Outer shield	Braid, Bare Copper (BC), 80% coverage
Jacket material	PVC - Polyvinyl Chloride
Overall cable diameter (nominal)	0.193 in (4.90 mm)

Electrical Characteristics

Nom. characteristic impedance	52 Ohm
Voltage rating	1900 V RMS
Nom. capacitance cond-to-shield	28.5 pF/ft (93.5 pF/m)
Nom. velocity of prop.	66%
Nom. conductor DCR	10.3 Ohm/1000ft (33.8 Ohm/km)
Nom. outer shield DCR	7.1 Ohm/1000ft (23 Ohm/km)

Attenuation (Nominal)

Attenuation (nominal) 1 MHz	0.3 dB/100ft
Attenuation (nominal) 10 MHz	1.1 dB/100ft
Attenuation (nominal) 50 MHz	2.5 dB/100ft
Attenuation (nominal) 100 MHz	3.8 dB/100ft
Attenuation (nominal) 200 MHz	5.6 dB/100ft
Attenuation (nominal) 400 MHz	8.4 dB/100ft
Attenuation (nominal) 700 MHz	11.7 dB/100ft
Attenuation (nominal) 900 MHz	13.7 dB/100ft
Attenuation (nominal) 1000 MHz	14.5 dB/100ft

Environmental & Mechanical Ratings

Operating temperature	-30°C to +80°C
Bend radius (stationary min.)	1.93 in (49.0 mm)
Bend radius (installation min.)	1.93 in (49.0 mm)
Max. pull tension	72 lbs (33 kg)
Bulk cable weight	23 lbs/1000ft (34 kg/km)
Environmental suitability	Indoor (Not Riser or Plenum), Indoor

Compliance & Certifications

Flammability / reaction to fire	IEC 60332-1-2
CPR compliance	CPR Euroclass: Eca
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
APAC compliance	China RoHS II (GB/T 26572-2011)

Applications

• Designed for point-to-point and point-to-multipoint wireless antenna communication.
• Commonly used in wireless microphone setups where coaxial signal routing is required.
• Supports two-way radio installations that use coaxial connections between equipment and antennas.
• Used in Amateur (Ham) Radio systems for antenna feed and related RF connections.
• Applied in Low Power FM systems where coaxial cable is needed for RF signal transmission.
• Suitable for GPS installations that require coaxial connectivity.
• Implemented in RFID (Radio Frequency Identification) systems where coaxial connections are part of the RF signal path.

Belden™ and all associated trademarks are the property of their respective owners.