Belden 9418 060, Multi Conductor Cable 4C 18 AWG FEP Flamarrest

Belden 9418 060 is a 4-conductor 18 AWG multi-conductor cable designed for low-voltage signal and control wiring in panels and indoor installations. It uses 19x30 stranded tinned copper conductors with SR-PVC insulation and an overall Beldfoil® tape shield with 100% coverage, plus a 20 AWG (19x32) tinned copper drain wire. A PVC outer jacket and a nominal 0.245 in (6.22 mm) overall diameter support clean routing and consistent handling. UL voltage rating is 300 V (CMG), 300 V (UL AWM 2464).

Belden 9418 060 Key Features

• 4 conductors in 18 AWG for low-voltage signal and control wiring.
• 19x30 stranded tinned copper conductors with SR-PVC - Polyvinyl Chloride (Semi-Rigid) insulation.
• Overall Beldfoil® tape shield with 100% coverage and a 20 AWG (19x32) TC drainwire for shielding continuity.
• PVC - Polyvinyl Chloride outer jacket with a nominal 0.245 in (6.22 mm) overall cable diameter.
• UL voltage rating: 300 V (CMG), 300 V (UL AWM 2464).

Belden 9418 060 Technical Specs

Construction & Physical Specs

Conductor material	TC - Tinned Copper
Insulation thickness (nom.)	0.011 in (0.28 mm)
Insulation diameter (nom.)	0.066 in (1.7 mm)
Color code	Red, Green, Black, White
Jacket thickness (nom.)	0.035 in (0.89 mm)
Shield type	Tape
Shield material	Bi-Laminate (Alum+Poly)

Electrical Characteristics

Nom. conductor DCR	6.5 Ohm/1000ft
Nom. capacitance cond-to-cond	40 pF/ft (130 pF/m)
Nom. capacitance cond-to-other (conds + Shield)	72 pF/ft (240 pF/m)
Max. current	5 Amps per Conductor at 25ºC
Nom. outer shield DCR	8.5 Ohm/1000ft (28 Ohm/km)

Environmental & Mechanical Ratings

UL temperature	80°C
Operating temperature	-20°C to +80°C
Bend radius (stationary min.)	2.5 in (64 mm)
Bend radius (installation min.)	2.5 in (64 mm)
Max. pull tension	113 lbs (51.3 kg)
Bulk cable weight	42 lbs/1000ft
Environmental suitability	Indoor (Not Riser or Plenum), Indoor

Compliance & Certifications

NEC / UL compliance	Article 800, CMG
CEC / C(UL) compliance	CMG
AWM compliance	AWM 2464
Flammability / reaction to fire	UL 1685 FT4 Loading, FT4, IEC 60332-1-2
CPR compliance	CPR Euroclass: Eca
European directive compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
UK regulation compliance	UKCA Mark
Sustainability	CA Prop 65
Plenum number	89418 or 82418

Belden 9418 060 Applications

• Use it for low voltage analog signals (4-20ma, 0-10v, ...) where consistent signal transfer is needed in indoor wiring runs.
• Wire low voltage control (24v, …) circuits in panels to support organized control and signal routing.
• Choose it for line level audio connections where shielded multi-conductor wiring is desired for indoor installations.
• Route voice communications wiring through panels and indoor pathways using this construction.
• Apply it in panel wiring where a multi-conductor design supports clean routing and consistent handling.

Belden™ and all associated trademarks are the property of their respective owners.