10/2 Control Cable EPR-CPE Type TC 600V Per Foot

This 10/2 EPR-CPE Control Cable is a 10 AWG, 2-conductor unshielded tray cable rated 600 volts and 90°C. Built with Class B stranded tinned copper conductors, flame-retardant EPR insulation, and a sunlight-resistant CPE jacket, this Type TC cable is approved for cable trays, direct burial, and Class 1 Division 2 hazardous locations. Buy by the foot at Ramcorp Wire & Cable — 100 ft minimum order.

10/2 EPR-CPE Control Cable Key Features

• UL 1277 Type TC listed for tray cable applications
• 600V rated, XHHW-2 type conductors
• 10 AWG stranded tinned copper conductors (25 strand, Class B per ASTM B-3)
• 90°C temperature rating (dry)
• Approved for direct burial and outdoor use
• Suitable for Class 1, Division 2 hazardous locations per NEC 501 & 502
• Sunlight-resistant black CPE jacket
• Flat construction for easy routing

10/2 EPR-CPE Control Cable Technical Specs

Construction & Materials

Number of Conductors	2
AWG	10
Stranding	25 strands (Class B per ASTM B-3)
Conductor Material	Stranded Tinned Copper
Insulation Material	EPR (Ethylene Propylene Rubber)
Insulation Thickness	0.030 in
Color Code	Black, Red
Jacket Material	CPE (Chlorinated Polyethylene)
Jacket Color	Black

Physical Dimensions & Weight

Overall Dimensions	0.271 in × 0.445 in (flat)
Weight	159 lbs/1000 ft

Environmental & Electrical Ratings

Voltage Rating	600 Volts
Temperature Rating	90°C (dry)
Conductor Type	XHHW-2
Sunlight Resistant	Yes
Direct Burial	Yes
Outdoor Rated	Yes

Compliance & Certifications

UL Listing	UL 1277 Type TC
Hazardous Locations	Class 1, Division 2 per NEC 501 & 502
Flame Test	VW-1

10/2 EPR-CPE Control Cable Applications

• Power, control, and lighting circuits in industrial facilities
• Cable tray installations per NEC Article 336
• Direct burial applications in wet or dry locations
• Class 1, Division 2 hazardous locations per NEC 501 & 502
• Outdoor installations requiring sunlight-resistant cable
• Wireways, ducts, conduit, and raceway installations
• Industrial control and automation wiring
• Signal and power distribution in manufacturing plants

Frequently Asked Questions

What is 10/2 EPR-CPE tray cable used for?
This 10/2 EPR-CPE cable is used for power, control, lighting, and signal circuits in industrial settings. It is designed for installation in cable trays, conduit, raceways, and direct burial applications.

Can this cable be direct buried?
Yes, this cable is approved and rated for direct burial in wet or dry locations. The CPE jacket provides excellent moisture, chemical, and sunlight resistance for outdoor and underground installations.

Is this cable rated for hazardous locations?
Yes, this cable is suitable for Class 1, Division 2 hazardous locations per NEC Articles 501 and 502, making it appropriate for environments with potentially flammable gases or combustible dust.

What does Type TC mean?
Type TC stands for Tray Cable. It meets UL 1277 requirements and is specifically designed for installation in cable trays, as well as wireways, ducts, conduit, and direct burial applications.

Can I buy this cable by the foot?
Yes! Simply enter the footage you need when ordering — 100 ft minimum order.

All data and dimensions are nominal and subject to industry standards. © Ramcorp Technologies LLC. All Rights Reserved.