10/2 Plenum Shielded Cable 10 Gauge 2 Conductors

10/2 Plenum Shielded Cable is a 10 Gauge 2 Conductor shielded plenum cable with Type CL2P. This cable features 10 gauge stranded copper conductors, color coded wires inside, and a white plenum rated jacket. It is made in the USA and supplied on a spool. The cable type is listed as Plenum Cable 10/2 Shielded.

10/2 Plenum Shielded Cable Key Features

• Shielded plenum cable in a 10/2 configuration with 2 conductors and 10 Gauge conductors.
• Type CL2P construction for installations requiring this cable type.
• 10 gauge stranded copper conductors with color coded wires inside for wire identification.
• White plenum rated jacket.
• Made in the USA.
• Supplied on a spool.

10/2 Plenum Shielded Cable Applications

• Suitable for security installations where shielded plenum cable is needed for in-building runs.
• Used in HVAC wiring projects that require plenum rated cable in commercial spaces.
• Installed for speaker wiring for audio distribution in plenum-rated environments.
• Applied to audio connections where a plenum-rated cable is required for the installation area.
• Used for access control wiring for doors and entry systems in plenum spaces.
• Supports card access system cabling in commercial building installations.
• Used to power CCTV camera runs in plenum-rated areas.
• Fits commercial grade installations where plenum rated cable is required.

Shipping & Availability

Available in multiple lengths and usually ships via standard ground shipping. We can ship this cable to your job site. Normally, all 10/2 Shielded Plenum Cable lengths ship within 24 hours, not including weekends and holidays.

Frequently Asked Questions

Is 10/2 plenum shielded cable a good choice for speaker runs above a drop ceiling in commercial buildings?

10/2 shielded plenum cable is a strong fit for speaker runs above suspended ceilings in commercial buildings where plenum-rated wiring is required. Its two 10 AWG stranded copper conductors support audio distribution, while the white plenum-rated jacket and CL2P type suit spaces used for environmental air. That combination lets installers route speaker cable overhead with less noise risk and without changing to a different cable type for the ceiling space.

Can 10 gauge 2 conductor CL2P shielded plenum cable be used for access control door wiring in plenum spaces?

10 gauge 2 conductor CL2P shielded plenum cable works for access control door wiring in plenum spaces, including entry systems and card access runs in commercial buildings. The CL2P type is used for power-limited cable in air-handling areas, and the shield helps limit interference around other building systems. That setup supports cleaner signal and power delivery to door hardware while simplifying cable choice for plenum sections of the pathway.

Is 10/2 shielded plenum cable suitable for powering CCTV cameras through air-handling ceiling spaces?

10/2 shielded plenum cable is suitable for CCTV camera power runs routed through air-handling ceiling spaces in commercial installations. The cable combines a white plenum-rated jacket with two 10 gauge stranded copper conductors and shielding, which is useful where low-voltage cabling shares space with other electrical systems. This enables overhead camera power routing in code-sensitive areas while reducing unwanted electrical noise along the run.

When should I choose 10/2 plenum shielded cable instead of non-shielded plenum cable for commercial audio wiring?

10/2 plenum shielded cable is the better choice for commercial audio wiring when the run passes through electrically busy spaces and signal protection matters. Shielding adds a barrier against outside interference, while the plenum construction keeps the cable appropriate for air-return ceiling areas. That extra protection helps preserve audio quality, reduces troubleshooting, and avoids replacing cable later in noise-prone installations.

Is CL2P 10/2 shielded cable used for HVAC wiring projects in plenum-rated commercial spaces?

CL2P 10/2 shielded cable is used for HVAC wiring projects in plenum-rated commercial spaces where shielded plenum cable is needed for in-building runs. Its two 10 gauge stranded copper conductors and shielding make it a practical option for control-related wiring routed through air-handling areas. This supports consistent installation practices in commercial spaces that require plenum-rated cable along the pathway.

Will stranded copper 10/2 shielded plenum cable be easier to pull and terminate than solid conductor cable for in-building runs?

10/2 shielded plenum cable with stranded copper conductors is generally easier to pull through building pathways than a comparable solid-conductor version because stranded wire bends more readily. Multiple fine copper strands improve flexibility, and the cable ships on a spool for smoother handling during installation. That flexibility speeds routing around bends, reduces kinking, and makes field termination more manageable on longer in-building runs.

Disclaimer: The information provided above is for general reference only and does not constitute professional electrical advice. Always consult a licensed electrician or qualified professional before selecting, installing, or working with electrical wire and cable products. Verify all specifications, ratings, and code compliance requirements with the manufacturer and your local authority having jurisdiction (AHJ) before purchase or installation.