22 AWG 2-Pair Individually Shielded FEP Plenum 200°C Cable

22 AWG 2-Pair Individually Shielded FEP Plenum 200°C Cable

The RWC-FP22-2PIS is a 22 AWG, 2-pair individually shielded FEP plenum cable, similar to Belden 88723. Four 7x30 stranded tinned copper conductors are twisted into 2 pairs, each insulated with FEP. Each pair is individually shielded with 100% aluminum foil and a 24 AWG stranded tinned copper drain wire. The red FEP outer jacket brings the overall diameter to 0.15 in (3.8 mm).

Rated CMP per NEC Article 800, this cable is approved for installation in plenum air-handling spaces without conduit. The all-FEP construction handles continuous temperatures from −70°C to +200°C (UL rated 150°C) and provides inherent resistance to chemicals, oils, and UV exposure. The individual pair shields deliver superior crosstalk rejection across both channels.

Technical Details

SKU or PN	RWC-FP22-2PIS
# of Pairs	2
# of Conductors	4
Conductor Gauge Size	22 AWG
Conductor Type	Stranded
Conductor Material	Tinned Copper
Strand Count	7 (7x30)
Insulation Material	Extruded FEP (Fluorinated Ethylene Propylene)
Nom. Capacitance Cond-to-Cond	35 pF/ft (110 pF/m)
Nom. Velocity of Propagation	69% Nom
Color Code	Black & Red, Green & White
Shield (Y/N)	Yes — Individually Shielded Pairs
Shield Type	Bi-Laminate Foil (100%) per pair, 24 AWG TC Drain Wire each pair
Jacket Material	Extruded FEP (Fluorinated Ethylene Propylene)
Jacket Color	Red
Temperature	−70°C to +200°C (150°C UL)
O.D. (Inches Nom.)	0.15
Outer Diameter (MM Nom.)	3.8
Voltage	300 Volts RMS
Approvals	(UL) CMP
Weight /LBS per 1000FT	19
Item Type	FEP/FEP Cable

Key Features

• CMP plenum rated
• All-FEP construction: −70°C to +200°C operating range (UL rated 150°C)
• Individually shielded pairs: 100% foil + 24 AWG drain wire per pair for superior crosstalk rejection
• 0.15 in OD — 2 pairs (4 conductors), fully color-coded
• 300V rated, 2.8 Amps per conductor at 25°C

Common Applications

• Plenum air-handling spaces
• Extreme high/low temperature environments
• Multi-channel audio, control & instrumentation
• Low voltage analog signals (4-20mA, 0-10V)
• Low voltage digital control (24V)
• Voice communications & panel wiring

Cross-Reference

This cable is similar to Belden 88723. Same 22 AWG 7x30 tinned copper conductors, FEP insulation, individually shielded pairs with 100% foil and drain wire, FEP jacket, 300V CMP plenum rated.

All data and dimensions are nominal and subject to industry standards and may vary according to plant of manufacture.

Data is provided for informational purposes and does not create a binding obligation nor liability to the seller. Data can change without notice. All Rights Reserved Ramcorp Technologies LLC.

Belden® is a registered trademark of Belden Inc. Ramcorp Wire & Cable is not affiliated with, endorsed by, or sponsored by Belden Inc. Part numbers are used for cross-reference purposes only.