22 AWG 4-Conductor FEP Plenum 150°C Cable

22 AWG 4-Conductor FEP Plenum 150°C Cable

The RWC-FP22-4U is a 22 AWG, 4-conductor FEP plenum cable, Belden 88444 compatible. Four 7x30 stranded tinned copper conductors are individually insulated with FEP. The red FEP outer jacket brings the overall diameter to 0.131 in (3.33 mm).

Rated CMP per NEC Article 800, this cable is approved for installation in plenum air-handling spaces without conduit. The all-FEP construction handles continuous temperatures from −20°C to +150°C (UL rated 150°C) and provides inherent resistance to chemicals, oils, and UV exposure — making it suitable for extreme high/low temperature environments, outdoor and direct burial applications.

Technical Details

SKU or PN	RWC-FP22-4U
# of Conductors	4
Conductor Gauge Size	22 AWG
Conductor Type	Stranded
Conductor Material	Tinned Copper
Strand Count	7 (7x30)
Insulation Material	Extruded FEP (Fluorinated Ethylene Propylene)
Nom. Capacitance Cond-to-Cond	18 pF/ft (59 pF/m)
Color Code	Black, White, Red, Green
Shield (Y/N)	No
Jacket Material	Extruded FEP (Fluorinated Ethylene Propylene)
Jacket Color	Red
Temperature	−20°C to +150°C (150°C UL)
O.D. (Inches Nom.)	0.131
Outer Diameter (MM Nom.)	3.33
Voltage	300 Volts RMS
Approvals	(UL) CMP
Weight /LBS per 1000FT	15
Item Type	FEP/FEP Cable

Key Features

• CMP plenum rated
• All-FEP construction: −20°C to +150°C operating range (UL rated 150°C)
• Oil resistant, chemical resistant, sunlight resistant
• 0.131 in OD — 4 individually color-coded conductors
• 300V rated, 7.2 Amps per conductor at 30°C

Common Applications

• Plenum air-handling spaces
• Extreme high/low temperature environments
• Chemical resistant applications
• Outdoor & direct burial
• Low voltage analog signals (4-20mA, 0-10V)
• Low voltage control (24V)
• Voice communications & panel wiring

Cross-Reference

This cable is similar to Belden 88444. Same 22 AWG 7x30 tinned copper conductors, FEP insulation, red FEP jacket, 300V CMP plenum rated.

All data and dimensions are nominal and subject to industry standards and may vary according to plant of manufacture.

Data is provided for informational purposes and does not create a binding obligation nor liability to the seller. Data can change without notice. All Rights Reserved Ramcorp Technologies LLC.

Belden® is a registered trademark of Belden Inc. Ramcorp Wire & Cable is not affiliated with, endorsed by, or sponsored by Belden Inc. Part numbers are used for cross-reference purposes only.