Belden 1041A 010, Power Limited Tray Cable 16 AWG 600V PVC 8C, Black Jacket

Belden 1041A 010 is a power limited tray cable designed for industrial control and instrumentation circuits where noise protection and durability are required. It is built with 8 pair 16 AWG (7x24) BC - Bare Copper conductors and PVC/Nylon - Polyvinyl Chloride + Nylon insulation with ICEA Chart E1 color coding. For EMI/RFI performance, it uses both individual and overall shields, including an overall Beldfoil® Shield with 100% coverage. The black PVC - Polyvinyl Chloride outer jacket is rated 600 V (TC-ER) and 150 V (NPLF) and supports 90°C Dry/Wet operation with Indoor/Outdoor suitability including Sunlight Resistance and Burial.

Belden 1041A 010 Key Features

• 8 pair construction with 16 AWG (7x24) stranded conductors made from BC - Bare Copper.
• PVC/Nylon - Polyvinyl Chloride + Nylon insulation with ICEA Chart E1 color coding.
• Both individual and overall shields, including an overall Beldfoil® Shield with 100% coverage.
• Black PVC - Polyvinyl Chloride outer jacket with Ripcord: Yes.
• UL Voltage Rating: 600 V (TC-ER), 150 V (NPLF).
• Operating: -30°C to 90°C Dry/Wet; UL Temperature: 90°C Dry, 90°C Wet.
• Environmental Suitability: Indoor/Outdoor, Indoor, Outdoor, Sunlight Resistance, Burial.
• Flammability / Reaction to Fire: UL 1685 FT4 Loading, FT4, IEEE 1202 FT4.
• NEC / UL Compliance: Article 336, Article 760, NPLF, TC-ER.
• European Directive Compliance: EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE).
• APAC Compliance: China RoHS II (GB/T 26572-2011).
• Other Standard Compliance(s): 07-KA080011-MSHA.
• Armor: No.
• Thermocouple: No.

Belden 1041A 010 Applications

• It is suited for industrial control and control circuits where reliable signal and power-limited tray cable routing is needed.
• In industrial environments, it can be installed in raceways cable trays and ducts to support organized cable management.
• Digital control and low voltage digital control (24v, …) connections are supported in automation and control systems.
• Instrumentation signals such as Instruments (4-20ma, 0-10v, ...) are supported for measurement and process monitoring.
• For encoders, it can be used where shielded pair construction is beneficial for noise-sensitive feedback signals.
• Distributed control system (DCS) wiring needs are supported in industrial control architectures.
• Programmable logic controller (PLC) I/O and interconnect wiring are supported.
• It can be applied to Solenoids, Valves, Actuators, and Positioners in control and automation equipment.

Belden™ and all associated trademarks are the property of their respective owners.