Belden 1076A 010, Power Limited Tray Cable 4PR 20 AWG 300V PVC, Black Jacket
SKU:Belden 1076A
● In stock
Description
Belden 1076A 010 is a power-limited tray cable for industrial control and instrumentation wiring in raceways, cable trays, and ducts. It is built with 4 twisted pairs of 20 AWG (7x28) bare copper conductors with PVC insulation, plus a 22 AWG (7x30) bare copper comm wire. For noise rejection in control circuits, each pair is individually shielded, and the cable also includes an overall Beldfoil® shield with 100% coverage. A black PVC outer jacket with ripcord supports easier installation, with ratings including PLTC ITC CMG AWM 2464 SUN RES and a UL voltage rating of 300 V (PLTC, CMG, AWM 2464), 150 V (ITC).
Belden 1076A 010 Key Features
- Power-limited tray cable designed for industrial control and instrumentation wiring in raceways, cable trays, and ducts.
- 4 twisted pairs of 20 AWG (7x28) BC - Bare Copper conductors, plus 1 comm wire of 22 AWG (7x30) BC - Bare Copper.
- PVC - Polyvinyl Chloride insulation on both the pairs and the comm wire.
- Individually shielded pairs plus an overall Beldfoil® shield with 100% coverage for noise rejection in control circuits.
- Black PVC - Polyvinyl Chloride outer jacket with ripcord for easier installation.
- Ratings: PLTC ITC CMG AWM 2464 SUN RES.
- UL voltage rating: 300 V (PLTC, CMG, AWM 2464), 150 V (ITC).
Belden 1076A 010 Applications
- Use in industrial control installations where control and instrumentation wiring is routed through raceways, cable trays, and ducts.
- Support digital control circuits that benefit from shielded construction for noise rejection in control circuits.
- Run instrumentation signal wiring, including Instruments (4-20ma, 0-10v, ...).
- Connect low voltage digital control (24v, …) connections in control systems.
- Serve encoders and other control circuits where noise rejection in control circuits is important.
- Enable distributed control system (DCS) wiring in industrial environments.
- Provide programmable logic controller (PLC) interconnects for control and instrumentation wiring.
- Wire solenoids, valves, actuators, and positioners in industrial control systems.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Pairs | 4 |
| Conductor Type | Stranded Conductor |
| Comm Wire(s) | 1 |
| Pair color code | ICEA Chart E1 |
| Comm Wire color | Orange |
| Inner shield (pair(s)) | Tape, Bi-Laminate (Alum+Poly), 100% coverage |
| Inner shield drainwire (pairs) | 22 AWG (7x30) TC |
| Outer shield | Tape, Bi-Laminate (Alum+Poly), 100% coverage |
| Outer shield drainwire | 20 AWG (7x28) TC |
| Ripcord | Yes |
| Armor | No |
| Pair insulation thickness (nominal) | 0.018 in (0.46 mm) |
| Pair insulation diameter (nominal) | 0.071 in (1.8 mm) |
| Comm wire insulation thickness (nominal) | 0.019 in (0.48 mm) |
| Comm wire insulation diameter (nominal) | 0.067 in (1.7 mm) |
| Outer jacket nominal thickness | 0.053 in (1.3 mm) |
| Overall cable diameter (nominal) | 0.444 in (11.3 mm) |
| Bulk cable weight | 100 lbs/1000ft |
| Pair(s) nominal conductor DCR | 9.5 Ohm/1000ft |
| Pairs nominal inner shield DCR | 12.86 Ohm/1000ft (42.19 Ohm/km) |
| Pair(s) max. current | 5.6 Amps per Conductor @ 30°C |
| Comm wire(s) nominal conductor DCR | 17.2 Ohm/1000ft (56.4 Ohm/km) |
| Comm wire(s) max. current | 9.6 Amps per Conductor @ 30°C |
| Nom. outer shield DCR | 6.5 Ohm/1000ft (21 Ohm/km) |
| UL temperature | 105°C |
| Operating temperature | -30°C to +105°C |
| Bend radius (stationary min.) | 5.2 in (130 mm) |
| Bend radius (installation min.) | 5.2 in (130 mm) |
| Max Pull Tension | 132 lbs (59.9 kg) |
| Environmental suitability | Indoor/Outdoor, Indoor, Outdoor, Sunlight Resistance |
| Flammability / reaction to fire | UL 1685 FT4 Loading, FT4, T-29-520, IEEE 1202 FT4 |
| NEC / UL compliance | Article 725, Article 727, Article 800, CMG, ITC, PLTC |
| AWM compliance | AWM 2464 |
| CEC / C(UL) compliance | CMG |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Instrumentation Cable |
| Priced Per | FT |
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.