Belden 3093A 010, Coax ControlNet Quad Shielded 18 AWG FFEP Black
Description
Belden 3093A 010 is an RG-6 industrial coaxial cable built with an 18 AWG solid BCCS - bare copper covered steel conductor, foam FEP insulation, and a black PVDF outer jacket. It uses a quad shield (F/B+F/B) construction with Duobond® II, aluminum braid, Duofoil®, and a second aluminum braid layer. Key electrical characteristics include 75 Ohm nominal characteristic impedance, 82% nominal velocity of prop., and UL voltage rating: 300 V (CMP). It is rated for NEC / UL compliance: CMP and CEC / C(UL) compliance: CMP, with UL temperature: 150°C and operating: -20°C to +150°C.
Belden 3093A 010 Key Features
- RG type: 6 coaxial construction for industrial coax applications.
- 18 AWG solid BCCS - bare copper covered steel conductor.
- Foam FEP - fluorinated ethylene propylene (foam) insulation.
- Quad shield (F/B+F/B) design using Duobond® II and Duofoil® tape layers plus two aluminum braid layers.
- Black PVDF - polyvinylidene fluoride outer jacket.
- NEC / UL compliance: CMP and CEC / C(UL) compliance: CMP.
- UL temperature: 150°C with operating: -20°C to +150°C.
- Nominal characteristic impedance: 75 Ohm and UL voltage rating: 300 V (CMP).
Belden 3093A 010 Applications
- Use in harsh environment factory automation networks where signal integrity and long run lengths matter.
- Specify it for ControlNet™ network installations.
- Support Modbus II connectivity in industrial environments with this cable.
- Apply it to other industrial coax applications.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Coax construction | Coaxial |
| Conductor nominal diameter | 0.040 in |
| Insulation color code | White |
| Nominal insulation diameter | 0.170 in (4.32 mm) |
| Outer jacket nominal diameter | 0.274 in (6.96 mm) |
| Overall cable diameter (nominal) | 0.274 in (6.96 mm) |
| Flooded | No not flooded over braid |
| Nominal Capacitance (Cond-to-Shield) | 16.5 pF/ft (54.1 pF/m) |
| Nominal conductor DCR | 28 Ohm/1000ft |
| Nominal outer shield DCR | 2.6 Ohm/1000ft (8.5 Ohm/km) |
| Return loss (5 - 50 MHz) | 23 dB |
| Nominal attenuation (1 MHz) | 0.34 dB/100ft |
| Nominal attenuation (2 MHz) | 0.37 dB/100ft |
| Nominal attenuation (5 MHz) | 0.44 dB/100ft |
| Nominal attenuation (10 MHz) | 0.58 dB/100ft |
| Nominal attenuation (20 MHz) | 0.85 dB/100ft |
| Nominal attenuation (50 MHz) | 1.39 dB/100ft |
| Nominal attenuation (100 MHz) | 1.99 dB/100ft |
| Nominal attenuation (200 MHz) | 2.92 dB/100ft |
| Nominal attenuation (300 MHz) | 3.68 dB/100ft |
| Nominal attenuation (400 MHz) | 4.38 dB/100ft |
| Installation min. bend radius | 2.75 in (69.9 mm) |
| Max Pull Tension | 104 lbs (47.2 kg) |
| Bulk cable weight | 36 lbs/1000ft |
| Flammability / reaction to fire | NFPA 262 |
| Environmental suitability | Indoor - Plenum, Indoor, Outdoor, Aerial - When supported by messenger Wire, Burial |
| Sustainability | CA Prop 65 |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Non-Plenum number | 3092A |
| Item Type | Belden Coaxial Cable RG6 |
| Other Part Numbers | 3093A 010, 3093A 010100, 3093A 010250, 3093A 010500, 3093A 0101000 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.