Belden 7733A 010, Coax RG 8 U Type 9 AWG 1 2 FFEP Black
SKU:Belden 7733A 010
● In stock
Description
Belden 7733A 010 is a 50 Ohm coaxial cable based on an RG-8/U type design for low-loss wireless transmission. It features a 10 AWG solid bare copper conductor, foam FEP insulation, and a dual shield of Duofoil® plus a 90% tinned copper braid. The black PVDF jacket supports plenum (CMP) installations and is listed for UV resistance. Electrical characteristics include UL Voltage Rating: 300 V (CMP, CL2P) and Nom. velocity of prop.: 84%.
Belden 7733A 010 Key Features
- 50 Ohm coaxial construction on an RG-8/U type design for wireless transmission.
- 10 AWG solid bare copper conductor (BC) with Nom. Diameter: 0.108 in.
- Foam FEP insulation with Nom. Insulation Diameter: 0.280 in (7.11 mm) and Color code: White.
- Dual shield construction: Duofoil® tri-laminate tape (Alum+Poly+Alum), 100%, plus tinned copper (TC) braid, 90%.
- Black PVDF jacket with Overall Cable Diameter (nominal): 0.355 in (9.02 mm).
- NEC / UL compliance: CL2P, CMP; CEC / C(UL) compliance: CMP; Flammability / reaction to fire: NFPA 262.
- Environmental suitability: Indoor - Plenum, Indoor, Outdoor, UV Resistance, Aerial - When supported by messenger wire.
Belden 7733A 010 Applications
- Supports point-to-point and point-to-multipoint wireless antenna communication links.
- Works well in wireless microphones where reliable RF signal transmission is required.
- Integrates into two-way radio RF communication setups.
- Serves amateur (ham) radio installations for RF connectivity.
- Applies to low power FM systems for RF transmission paths.
- Meets GPS signal distribution and connection needs in RF systems.
- Connects RF signal paths in RFID (Radio Frequency Identification) systems.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Shield Type | Braid over foil |
| Nom. characteristic impedance | 50 Ohm |
| Nom. velocity of prop. | 84% |
| UL Voltage Rating | 300 V (CMP, CL2P) |
| Nom. capacitance (Cond-to-Shield) | 24.2 pF/ft (79.4 pF/m) |
| Nom. conductor DCR | 0.9 Ohm/1000ft |
| Nom. outer shield DCR | 1.8 Ohm/1000ft (5.9 Ohm/km) |
| Attenuation @ 1 MHz | 0.1 dB/100ft |
| Attenuation @ 10 MHz | 0.4 dB/100ft |
| Attenuation @ 50 MHz | 1.1 dB/100ft |
| Attenuation @ 100 MHz | 1.5 dB/100ft |
| Attenuation @ 200 MHz | 2.1 dB/100ft |
| Attenuation @ 400 MHz | 3.2 dB/100ft |
| Attenuation @ 700 MHz | 4.5 dB/100ft |
| Attenuation @ 900 MHz | 5.7 dB/100ft |
| Attenuation @ 1000 MHz | 5.9 dB/100ft |
| Attenuation @ 4000 MHz | 14.1 dB/100ft |
| UL temperature | 150°C |
| Operating | -20°C to +150°C |
| Installation min. bend radius | 3.6 in (91 mm) |
| Max Pull Tension | 174 lbs (78.9 kg) |
| Bulk cable weight | 115 lbs/1000ft |
| Sustainability | CA Prop 65 |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 7733A 010100, 7733A 010250, 7733A 010500, 7733A 0101000 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.