Belden 7806A 010, Coax RG 58 Type RF195 50 OHM PE Black
Description
Belden 7806A 010 is a 50 Ohm wireless transmission coax designed as RF 195 / RG58 type for RF applications. It features a 19 AWG solid bare copper conductor with PE - Polyethylene (Foam) insulation and supports a 5 - 6000 MHz frequency range. Shielding combines Duofoil® tape (100% coverage) with a 90% tinned copper braid to help reduce interference. The black PE - Polyethylene jacket is listed for indoor/outdoor use, including aerial installations (black only) when supported by messenger wire.
Belden 7806A 010 Key Features
- This 50 Ohm wireless transmission coax is built as RF 195 / RG58 type for RF signal transmission.
- It uses a 19 AWG solid bare copper conductor for consistent construction.
- PE - Polyethylene (Foam) insulation is provided with a white color code.
- Shielding includes Duofoil® tape (Tri-Laminate (Alum+Poly+Alum), 100% coverage) plus a 90% tinned copper (TC) braid shield.
- Frequency range: 5 - 6000 MHz; Max. VSWR: 1.25:1 (5 - 6000 MHz).
- The black PE - Polyethylene jacket is suitable for indoor/outdoor, indoor, and aerial - black only, when supported by messenger wire.
Belden 7806A 010 Applications
- It supports point-to-point and point-to-multipoint wireless antenna communication links.
- Wireless microphone signal paths commonly use it where RF transmission is required.
- Two-way radio installations can use it for coaxial RF connections.
- In Amateur (Ham) Radio setups, it works well for connecting RF equipment.
- Low Power FM systems use it where coax is needed between RF components.
- GPS connections can use it when an RF coax feed is required.
- RFID (Radio Frequency Identification) systems apply it for RF cabling between devices.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Overall cable diameter (nominal) | 0.195 in (4.95 mm) |
| Conductor diameter (nominal) | 0.037 in |
| Insulation diameter (nominal) | 0.110 in (2.79 mm) |
| Jacket diameter (nominal) | 0.195 in (4.95 mm) |
| Bulk cable weight | 23 lbs/1000ft |
| Voltage Rating | 300 V |
| Nom. conductor DCR | 7.6 Ohm/1000ft |
| Nom. outer shield DCR | 4.2 Ohm/1000ft (14 Ohm/km) |
| Nom. capacitance (Cond-to-Shield) | 24.3 pF/ft (79.7 pF/m) |
| Nom. velocity of prop. | 77% |
| Nominal attenuation | 5 MHz: 0.75 dB/100ft; 10 MHz: 1 dB/100ft; 30 MHz: 1.8 dB/100ft; 50 MHz: 2.5 dB/100ft; 150 MHz: 4 dB/100ft; 220 MHz: 4.9 dB/100ft; 450 MHz: 7.1 dB/100ft; 900 MHz: 10.3 dB/100ft; 1500 MHz: 13.7 dB/100ft; 1800 MHz: 15.2 dB/100ft; 2000 MHz: 16.1 dB/100ft; 2500 MHz: 18.3 dB/100ft; 3000 MHz: 20.5 dB/100ft; 4500 MHz: 26.5 dB/100ft; 5800 MHz: 31.2 dB/100ft; 6000 MHz: 32 dB/100ft |
| Max. power rating | 30 MHz: 890 W; 50 MHz: 694 W; 150 MHz: 403 W; 220 MHz: 336 W; 450 MHz: 231 W; 900 MHz: 162 W; 1,500 MHz: 124 W; 2,000 MHz: 107 W; 2,500 MHz: 95 W; 3,500 MHz: 80 W; 4,500 MHz: 70 W; 6,000 MHz: 61 W |
| Operating temperature | -40°C to +80°C |
| Bend radius (installation min.) | 0.5 in (13 mm) |
| Max Pull Tension | 40 lbs (18 kg) |
| Sustainability | CA Prop 65 |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 7806A 010100, 7806A 010250, 7806A 010500, 7806A 0101000 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.