Belden 7808A 010, Coax RG 8X RF240 50 OHM PE Black
Description
Belden 7808A 010 is a 50 Ohm wireless transmission coax designed for RF applications where low loss and consistent performance matter. It is an RG-8X type (58X) cable with a 15 AWG solid bare copper conductor, PE insulation, and a PE jacket. Shielding uses Duofoil® (100%) plus a 95% tinned copper braid, and the cable is rated 300 V.
Belden 7808A 010 Key Features
- 50 Ohm wireless transmission coax for RF applications.
- RG-8X type (58X) construction with a 15 AWG solid bare copper conductor.
- Duofoil® (100%) plus 95% tinned copper braid shielding.
- 300 V voltage rating.
- VSWR performance specified from 5-6000 MHz with Max. VSWR: 1.25:1.
Belden 7808A 010 Applications
- Support point-to-point and point-to-multipoint wireless antenna communication.
- Use in wireless microphones where RF signal transmission is required.
- Install in two-way radios systems.
- Apply in Amateur (Ham) Radio setups.
- Fit low power FM applications.
- Use for GPS installations.
- Support RFID (Radio Frequency Identification) installations.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| RG type | 58X |
| Conductor | 15 AWG Solid, 0.057 in, BC - Bare Copper |
| Insulation Material | PE - Polyethylene (Foam) |
| Nom. insulation diameter | 0.150 in (3.81 mm) |
| Color Code | White |
| Outer shield layer 1 | Tape, Tri-Laminate (Alum+Poly+Alum), Duofoil®, 100% |
| Outer shield layer 2 | Braid, Tinned Copper (TC), 95% |
| Outer jacket material | PE - Polyethylene |
| Jacket Color | Black |
| Nom. jacket diameter | 0.240 in (6.10 mm) |
| Overall cable diameter (nominal) | 0.240 in (6.10 mm) |
| Bulk cable weight | 36 lbs/1000ft |
| Nom. velocity of prop. | 86% |
| Nom. capacitance (Cond-to-Shield) | 23 pF/ft (75 pF/m) |
| Nom. conductor DCR | 3.2 Ohm/1000ft |
| Nom. outer shield DCR | 2.8 Ohm/1000ft (9.2 Ohm/km) |
| Attenuation | 5 MHz: 0.58 dB/100ft; 10 MHz: 0.77 dB/100ft; 30 MHz: 1.3 dB/100; 50 MHz: 1.6 dB/100ft; 150 MHz: 2.8 dB/100ft; 220 MHz: 3.4 dB/100ft; 450 MHz: 4.9 dB/100ft; 900 MHz: 7.0 dB/100ft; 1500 MHz: 9.1 dB/100ft; 1800 MHz: 10.1 dB/100ft; 2000 MHz: 10.7 dB/100ft; 2500 MHz: 12 dB/100ft; 3000 MHz: 13.4 dB/100ft; 3500 MHz: 14.6 dB/100ft; 4500 MHz: 16.7 dB/100ft; 5800 MHz: 19.5 dB/100ft; 6000 MHz: 19.8 dB/100ft |
| Power rating | 30 MHz: 1,526 W; 50 MHz: 1,186 W; 150 MHz: 673 W; 220 MHz: 556 W; 450 MHz: 382 W; 900 MHz: 268 W; 1,500 MHz: 205 W; 2,000 MHz: 177 W; 2,500 MHz: 156 W; 3,500 MHz: 100 W; 4,500 MHz: 116 W; 6,000 MHz: 100 W |
| Operating temperature | -40°C to +80°C |
| Installation min. bend radius | 0.75 in (19 mm) |
| Max Pull Tension | 74 lbs (34 kg) |
| Environmental suitability | Outdoor, Outdoor, Aerial - Black only, When supported by messenger Wire |
| Sustainability | CA Prop 65 |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 7808A 010100, 7808A 010250, 7808A 010500, 7808A 0101000 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.