Belden 7986LC 010, Coax CCTV Surveillance 20 AWG FFEP BRD FEP Black
Description
Belden 7986LC 010 is an RG59 surveillance and CCTV coax cable designed for 75 Ohm video signal transmission in plenum spaces. It features a 20 AWG solid bare copper conductor with foam FEP insulation and a 95% bare copper braid shield. This black FEP-jacketed coax meets Limited Combustible FHC 25/50 CMP requirements and carries a 300 V RMS UL voltage rating. Sequential footage marking every two feet supports efficient installation and pull planning.
Belden 7986LC 010 Key Features
- RG type 59 coaxial construction with 1 coax and 1 conductor.
- 75 Ohm nominal characteristic impedance for video signal transmission.
- 20 AWG solid BC - bare copper conductor.
- FFEP-foamed (cellular) dielectric with FEP - Fluorinated Ethylene Propylene (Foam) insulation and Teflon® material trade name.
- Braid-only shield with bare copper (BC) and 95% coverage.
- FEP - Fluorinated Ethylene Propylene jacket in black with Teflon® material trade name.
- Limited Combustible FHC 25/50 CMP plenum rating with UL723 (NFPA 255) UL flammability.
- Sequential footage marking every two feet.
Belden 7986LC 010 Applications
- Ideal for surveillance installations where a coax cable is needed to carry video signals.
- Connect CCTV cameras in indoor environments.
- Specify it for plenum spaces where Limited Combustible FHC 25/50 CMP plenum-rated cable is required.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Conductor nominal diameter | 0.032 in |
| Insulation nominal diameter | 0.133 in |
| Jacket nominal diameter | 0.193 in |
| Bulk cable weight | 31 lbs/1000ft |
| Nom. capacitance (Conductor to Shield) | 16.1 pF/ft |
| Nominal inductance | 0.097 µH/ft |
| Nominal conductor DCR | 10 Ohm/1000ft |
| Nominal outer shield DCR | 2.5 Ohm/1000ft |
| Max. delay skew | 84 ns/100m |
| Nominal delay | 1.21 ns/ft |
| Nominal velocity of propagation (VP) [%] | 84% |
| High Frequency insertion loss (1 MHz) | 0.29 dB/100ft |
| High Frequency insertion loss @ 3 MHz | 0.58 dB/100ft |
| High Frequency insertion loss (5 MHz) | 0.7 dB/100ft |
| High Frequency insertion loss @ 8 MHz | 0.87 dB/100ft |
| High Frequency insertion loss (10 MHz) | 1.05 dB/100ft |
| High Frequency insertion loss @ 50 MHz | 1.8 dB/100ft |
| High Frequency insertion loss (100 MHz) | 2.7 dB/100ft |
| High Frequency insertion loss @ 200 MHz | 3.9 dB/100ft |
| High Frequency insertion loss @ 400 MHz | 5.9 dB/100ft |
| High Frequency insertion loss @ 700 MHz | 8.5 dB/100ft |
| High Frequency insertion loss @ 900 MHz | 10 dB/100ft |
| High Frequency insertion loss (1000 MHz) | 10.7 dB/100ft |
| UL Temperature Rating | 200°C |
| Operating Temperature Range | -40°C To +200°C |
| Maximum recommended pulling tension | 55 lbs |
| Min Bend Radius (Overall Cable) | 1.04 |
| Minimum minor axis bend radius | 1.9 in |
| Plenum (Y/N) | Yes |
| Fire rating | Plenum |
| Flooded | No not flooded over braid |
| Suitability - indoor | Yes |
| Suitability - burial | No |
| Suitability - hazardous locations | No |
| Outdoor | No not outdoor grade material |
| EU Directive 2000/53/EC (ELV) | Yes |
| EU Directive 2003/11/EC (BFR) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU directive compliance | Yes |
| MII Order #39 (China RoHS) | Yes |
| Packaging footnote | C - CRATE REEL PUT-UP. |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 7986LC 010500, 7986LC 0101000, UPC 612825192473 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.