Belden 7999AP 010, Series 11 14 AWG FFEP DBSH SLF Black
SKU:Belden 7999AP 010
● In stock
Description
Belden 7999AP 010 is a Series 11 (RG Type: 11) broadband coaxial cable designed for high-performance CATV and RF distribution. It features a 14 AWG solid BCCS - Bare Copper Covered Steel conductor with FEP - Fluorinated Ethylene Propylene (Foam) insulation and a Quad Shield (F/B+F/B) construction using Duofoil® tapes plus 60% and 40% aluminum braids. A PVDF - Polyvinylidene Fluoride jacket in Black supports Indoor - Plenum installations and meets CMP requirements. The cable is rated 75 Ohm characteristic impedance and includes published attenuation and return loss performance through 3000 MHz.
Belden 7999AP 010 Key Features
- Series 11 coaxial design (RG Type: 11) for broadband RF signal distribution.
- 14 AWG solid BCCS - Bare Copper Covered Steel conductor for consistent coax performance.
- FEP - Fluorinated Ethylene Propylene (Foam) insulation with White color code.
- Quad Shield (F/B+F/B) construction with Duofoil® 100% tapes and aluminum braids (60% and 40%) for signal protection.
- PVDF - Polyvinylidene Fluoride jacket in Black for Indoor - Plenum and Indoor use with CMP requirements.
Belden 7999AP 010 Applications
- Use in broadband installations where a Series 11 coax is selected for RF signal distribution.
- Support cable television (CATV) runs in indoor environments, including plenum spaces where CMP is required.
- Route RF drop cable to connect distribution points to end equipment within a building.
- Enable direct broadcast satellite (DBS) connections where consistent RF performance is needed through higher frequencies.
- Carry over-the-air (OTA) antenna signals from the antenna location to the receiving equipment.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Coax count | 1 |
| Conductor diameter (nom.) | 0.064 in |
| Insulation diameter (nom.) | 0.274 in (6.96 mm) |
| Jacket diameter (nom.) | 0.372 in (9.45 mm) |
| Overall cable diameter (nom.) | 0.372 in (9.45 mm) |
| Bulk cable weight | 63 lbs/1000ft (94 kg/km) |
| Non-Plenum number | 7999A |
| Stationary min. bend radius | 3.75 in (95.3 mm) |
| Installation min. bend radius | 3.75 in (95.3 mm) |
| Max Pull Tension | 260 lbs (120 kg) |
| Nom. velocity of prop. | 83% |
| Nom. capacitance (Cond-to-Shield) | 16.3 pF/ft (53.5 pF/m) |
| Nom. conductor DCR | 11 Ohm/1000ft (36 Ohm/km) |
| Nom. outer shield DCR | 3 Ohm/1000ft (9.8 Ohm/km) |
| UL Voltage Rating | 300 V RMS |
| Voltage Rating | 300 V RMS |
| Return loss (min. structural return loss) | 5 - 1000 MHz: 20 dB; 1000 - 2250 MHz: 15 dB; 2250 - 3000 MHz: 10 dB |
| Attenuation | 1 MHz: 0.2 dB/100ft; 10 MHz: 0.5 dB/100ft; 50 MHz: 0.9 dB/100ft; 100 MHz: 1.3 dB/100ft; 200 MHz: 1.9 dB/100ft; 400 MHz: 2.8 dB/100ft; 700 MHz: 3.9 dB/100ft; 750 MHz: 4.3 dB/100ft; 900 MHz: 4.7 dB/100ft; 1000 MHz: 5.0 dB/100ft; 1450 MHz: 6.7 dB/100ft; 1800 MHz: 7.7 dB/100ft; 2250 MHz: 8.5 dB/100ft; 3000 MHz: 9.9 dB/100ft |
| UL temperature | 150°C |
| Operating temperature | -20°C to +150°C |
| Environmental suitability | Indoor - Plenum, Indoor |
| Flammability / reaction to fire | NFPA 262 (UL 910), FT6 |
| NEC / UL compliance | Article 800, CATVP, CMP |
| CEC / C(UL) compliance | CMP |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 7999AP 010250, 7999AP 010500, 7999AP 0101000, UPC 612825195917 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.