Belden 8213 010, Coax RG 11 U Type 75 Ohm Black
Description
Belden 8213 010 is an RG 11 U Type 75 Ohm coaxial cable for indoor/outdoor installations. It features a 14 AWG Solid .064 in Bare Copper conductor, gas-injected foam HDPE insulation, and a Bare Copper braid shield with 95% coverage. A Black PE - Polyethylene jacket provides protection, and the cable is suitable for aerial runs (when supported by messenger Wire), burial, indoor, and outdoor use.
Belden 8213 010 Key Features
- RG 11 U Type 75 Ohm coaxial cable construction.
- 14 AWG Solid .064 in Bare Copper conductor.
- Gas Injected PE - Polyethylene (Foam) insulation.
- Bare Copper (BC) braid shield with 95% coverage.
- Black PE - Polyethylene jacket.
- Indoor/outdoor environmental space with suitability for burial and aerial runs (when supported by messenger Wire).
Belden 8213 010 Applications
- Use this cable for indoor/outdoor installations where a 75 Ohm coaxial cable is required.
- For aerial runs, it is appropriate when supported by messenger Wire.
- For burial installations, it is suitable.
- In general indoor and outdoor routing, it works where the cable’s specified construction and ratings are needed.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Coax construction | Coaxial |
| Coax Type | RG 11 |
| RG type | 11 |
| Series type | 11 |
| Number of coax | 1 |
| Number of Conductors | 1 |
| Outer shield type | Braid |
| Insulation nominal diameter | 0.285 in |
| Jacket nominal diameter | 0.405 in |
| Nom. capacitance (Conductor to Shield) | 16.1 pF/ft |
| Nominal inductance | 0.097 µH/ft |
| Nominal delay | 1.21 ns/ft |
| Nominal velocity of propagation (VP) [%] | 84% |
| Nominal conductor DCR | 2.6 Ohm/1000ft |
| Nominal outer shield DCR | 1.1 Ohm/1000ft |
| Non-UL voltage rating | 300 V RMS |
| Min. structural return loss (SRL) | 23 dB (5-450 MHz) |
| Nom. structural return loss (SRL) | 23 dB (1 MHz) |
| Nom. insertion loss | 0.2 dB/100ft (1 MHz); 0.9 dB/100ft (5 MHz); 1.3 dB/100ft (100 MHz); 1.9 dB/100ft (200 MHz); 2.9 dB/100ft (400 MHz); 0.4 dB/100ft (450 MHz); 4.1 dB/100ft (700 MHz); 4.8 dB/100ft (900 MHz); 5.2 dB/100ft (1000 MHz) |
| Max. insertion loss (attenuation) | 4.4 dB/100ft (400 MHz) |
| Non-UL temp rating | 80°C |
| Operating Temperature Range | -55°C To +80°C |
| Bulk cable weight | 78 lbs/1000ft |
| Maximum recommended pulling tension | 171 lbs |
| Minimum minor axis bend radius | 4 in |
| Plenum (Y/N) | No |
| EU CE mark | Yes |
| EU Directive 2000/53/EC (ELV) | Yes |
| EU Directive 2003/11/EC (BFR) | Yes |
| EU Directive 2011/65/EU (RoHS 2) | Yes |
| EU Directive 2012/19/EU (WEEE) | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment) | Yes |
| EU directive compliance | EU Directive 2003/11/EC (BFR) |
| MII Order #39 (China RoHS) | Yes |
| Footnote | C - CRATE REEL PUT-UP. |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 8213 010100; 8213 010250; 8213 010500 UPC 612825196211; 8213 0101000 UPC 612825357599; 8213 0102000 UPC 612825355557 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.